Gennady Gurov

warnings can be skipped, errors stop the show. naming conveys severity of the condition. therefore, it should not be unified but clarified and respected

additionally, stepper valve should re-init position and time Vbat goes from key on.

> excuse me, how are you getting such low PW values? The lowest I can get is 5,5ms and I could use lower PW because my idle is too high...

Ethernet seems to be enabled, testing 2024-02-26 latest main board is a Nucleo-F767ZIT6U (https://www.digikey.com/en/products/detail/stmicroelectronics/NUCLEO-F767ZI/6004740) have to adjust the ipaddress, as there's no dhcp: ``` #define LWIP_IPADDR(p) IP4_ADDR(p, 192, 168, 1,...

I'm not sure this can be set by default, this is more of a TS preference. so more of a guidance on "silently autoname log files" as well as triggered...

with changes in https://github.com/rusefi/rusefi/issues/6007 "save tune to log" works fine, when opening the log, the tables are pulled into the log viewing session

this is happening because in the MSQ, RE saves RPM_bins and MAP_bins as ` ` and ` ` and MLV needs it to be: ` ` and ` ` frpm_table...

these additions to the .ini file fix the MSQ that's produced by TS and no longer breaks MLV: ``` # for MLV advanceTable = array, S16, 16568, [16x16], "deg", 0.1,...

 running

reproduced, similar thing:   https://www.youtube.com/watch?v=kIxebA81Nag [reproduced_oscillations_3_0_trigger.zip](https://github.com/rusefi/rusefi/files/15213943/reproduced_oscillations_3_0_trigger.zip) tune log and .sal file in the zip above. "time" variable in TS shows about 50 hours.