ALARM STATUS on Universal Videohub 288

[jfpanisset]

Here's what the telnet interface reports on a Universal Videohub 288:

ALARM STATUS:
Fan 0: ok
Fan 1: ok
Fan 2: ok
Power Supply Slot 0: ok
Power Supply Slot 1: ok
Power Sufficient for Load: ok
Network Slot 0: ok
Network Slot 1: ok
Card Bus: ok
Card Firmware Version: ok
Logic Slot 0: ok
Logic Slot 1: ok
Logic Firmware Version Slot 0: ok
Logic Firmware Version Slot 1: ok
ProcessorLink: ok
Processor Firmware Version: ok
Crosspoint Slot 0: ok
Crosspoint Slot 1: ok
Bus Host Slot 0: ok
Bus Host Slot 1: ok
Bus Host Firmware Version Slot 0: ok
Bus Host Firmware Version Slot 1: ok

This appears to be informational only, there's not really anything actionable from an API perspective. But would be useful to present it to the caller / not error out on it.

[gfto]

Can you send me via email the whole config output (see Reporting bugs in the README) so I can properly add support for ALARM STATUS (it is currently in the TODO).