gereic
gereic
Is the Murata 1SJ-Module already supported on Arduino ? So If I buy a module and build a pcb-board myself, can I already program and test it with arduino ?
updated GXAircom to XPowerLib. Works on T-Beam (axp192) and S3Core (axp2101). Can you test it ?
The Problem is, that many boards have only 4MB Flash and I want to be comatible. So I want to leave it to 4MB Flash. As when I switch to...
I think it will decrease the flash-size, when I unset Options for the small Boards (IPV6, BLuettoth Classic, CAN, ...) Will Try it.
problem is, that https is only working with wifi. On Sim7000 it is not working, because only 2 connections are allowed. I'm currently working on another solution, that the Ground-station...
at the moment, I write the weather-data to the topic GXAircom/_DEVID_/WD for example: { "DT": "2023-07-03T12:45:53+00:00", "wDir": "227.01", "vaneValue": "225", "error": "0", "wSpeed": "4.27", "wGust": "9.36", "temp": "29.87", "hum": "51.89",...
The idea behind is, to setup a webpage, where you can configure all things for the ground-station and you have nothing to adjust on the ground-station itself. Also the code...
Hi, I added this feature in the settings. Please try and give feedback.
You can already send 1 WU-Station by 1 GxAircom to FANET. Sending multiple WU-Stations from 1 GxAircom is not implemented yet.
Hi, I ordered a peet-bros anemometer. When I have it, I will implement the code and test it.