midea_ac_lan
midea_ac_lan copied to clipboard
georgezhao2010
Deprecated is_aux_heat on climate
HA core version
2024.4.0
Intergration version
0.3.22
Device type and model
Any climate
Used App
Any
The description of problem
is_aux_heat will not work on climate devices after version 2024.10.0 https://developers.home-assistant.io/blog/2024/03/10/climate-aux-heater-deprecated/
The logs
No response
~afaik the #420 will fix it. hope it can be merged soon!~ edit: actually after looking into the change more thoroughly and reading the details of the announced deprecation, the mentioned PR won't fix it. Someone must look into details more.
Guys, please stop spamming "+1" or "same for me". Add reaction to first comment instead, your comments aren't adding anything of value to this issue.
We're maintaining this repo in this fork: https://github.com/wuwentao/midea_ac_lan
in the official application there are 2 features that this integration does not have:
-
The option to choose the fan speed from 1% to 1%. That is to say to be able to set the speed to 23% or 31%... here only leaves some preconfigured: Silent 20 - Low 40 - Medium 60 - High 80 - Full 100 - Auto
-
The official application allows you to choose the fixed position of the orientation blades. I.e. you can choose if you want the blades to be fixed in high position or in low position etc... While in this integration you can only choose whether they are moving or stopped. And when you choose stopped they stop in the position in which they are at that moment. It only leaves only the mode of the slider oscillation: Off, Vertical, Horizontal, Both.
do you plan to introduce them in future revisions @rokam y @Kijan ??
You need to create an issue in the repo. We're focusing on migrating this to core. But some features can be done.
in the official application there are 2 features that this integration does not have:
1. The option to choose the fan speed from 1% to 1%. That is to say to be able to set the speed to 23% or 31%... here only leaves some preconfigured: Silent 20 - Low 40 - Medium 60 - High 80 - Full 100 - Auto 2. The official application allows you to choose the fixed position of the orientation blades. I.e. you can choose if you want the blades to be fixed in high position or in low position etc... While in this integration you can only choose whether they are moving or stopped. And when you choose stopped they stop in the position in which they are at that moment. It only leaves only the mode of the slider oscillation: Off, Vertical, Horizontal, Both.do you plan to introduce them in future revisions @rokam y @Kijan ??
it is not my fork. i found it, as i looked for this problem and the solution and because this repo is quiet dead i thought maybe it helps someone xD