Jeff Geerling

Also re-testing LLM performance with llama 3.2:3B, I am getting slightly reduced performance (see [original benchmarks](https://github.com/geerlingguy/ollama-benchmark/issues/25)): | model | size | params | backend | ngl | test | t/s...

In the video, I noted some choppy performance on both systems, maxing out around 12 fps in the built-in Cyberpunk 2077 benchmark. @bexcran noticed the card was operating at PCIe...

Here's a video of the conclusion of the Cyberpunk 2077 benchmark with `pcie_aspm=off`: https://github.com/user-attachments/assets/dddb6d40-f26f-4465-b425-87949f6b9845

On the Raspberry Pi, I tried installing the Preview, and that worked, but when it asked for my registration information, and I entered it, it would repeatedly say 'Registration failed'....

On the Thelio Astra, I set every setting to Off or Low, and set the resolution to the lowest (1024x768), and it still only got 25 fps, so I think...

On the Pi, I let it run installing Steam for over an hour, but after it started installing the update (the initial install was fine), the CPU got stuck at...

I switched to DXVK manually, but that seemed to make no difference. I set the card to forced Gen 4x16 using the two commands you listed above, and that did...

@MillerDvS - My results match yours pretty closely (25-ish fps to 33 fps in my case). Good to see more data, and thanks for providing the additional info!

@MillerDvS haha I hear you on that last line... The GB10 has a nice Mediatek CPU in the 'Grace' side of things. Why can't we just have that, for an...

DGX Spark / Dell Pro Max GB10 with Framegen enabled: