Jeff Geerling
Jeff Geerling
I first tried re-seating everything, and only running the boot NVMe in slot 2, with nothing in slot 1. It still takes a pretty long time before the kernel boot...
Got some timeouts in the logs during boot: ``` [ 3.647613] could not locate request for tag 0x0 [ 3.652656] nvme nvme0: invalid id 0 completed on queue 1 [...
When I tried running some disk benchmarks behind the switch: ``` [ 289.638013] could not locate request for tag 0x0 [ 289.638025] nvme nvme0: invalid id 0 completed on queue...
Swapped in the Pineboard. First boot on a freshly-flashed Pi OS Lite did the normal cycle, but second boot was being weird. Spying on things with my Debug Probe, I...
On a separate HatDrive! Commander board (which I've tested with a SATA controller + 2.5G Ethernet in my first SATA Pi NAS build—before I went for a 2.5G USB Ethernet...
Same thing with 3rd PCIe switch. And the 2nd and 3rd are both switches I have never had an issue with in the past :/ ``` [ 3.373708] mmc1: new...
Just to reset my sanity, I replugged everything direct (dropping the switch out of the equation). It boots up with no problem whatsoever, and the filesystem mounts right away, nicely:...
I don't think it's a power issue, but never say never.
Do you have a good picture of the card we could use for it?
I'm [benchmarking the drive with `fio`](https://www.jeffgeerling.com/blog/2024/quick-nvme-performance-testing-fio) and it seems to be working okay when I just have one drive, unformatted, running in the carrier. Going to reboot a couple more...