simplyRetro-Z5
simplyRetro-Z5 copied to clipboard
A 3D printed, five inch retro gaming handheld.
The link to the lipo battery is too big for the bracket. It’s also different in size from the one linked to Adafruit, which I assume must be the correct...
The Amazon link goes to a kit that has an HDMI A1 connector (correct), HDMI C2 connector (incorrect—should be C1), and a 20cm FPC cable (incorrect—should be 5cm).
Hi, when I try to SSH to my Pi0, putty just hangs after entering the password. The Pi seems to refresh itself in some way at this point (perhaps ES...
It might be a good thing to play a sound (like a Gameboy sound) when turning on the Z5 to check that the speakers are working with enable / disable...
At the moment it is necessary to execute two different files to resize the filessystem to use the full size of the used SD card. Maybe this could be done...
Any tips on how to approach this?