gdoor
gdoor copied to clipboard
gdoor-org
Wifi adapter and bus protocol documentation for the Gira TKS Door System
There is currently no audio support planned until reverse engineering and interfacing with the digital bus is fully working. Creating this Issue as a placeholder for possible future work and...
- Currently only hardware - Work in progress - Firmware to be done with hardware - v4.0 with skip to v4.1 - Needs ESP32-S3 board - Closes #28 ### Features...
Hi, I just recently discovered this project and would like to get involved, for example integration in ESPHome (discussed in #25) is something I might be able to contribute to....
Nothing urgent or necessarily needed but I thought it might be useful to have a diagnostics status / serial debug output when the adapter detects that the bus in connected/disconnected...
Currently, home assistant integration is done through MQTT with [auto discovery](https://github.com/gdoor-org/gdoor/pull/18). However, in my opinion, the integration in home assistant still offers potential for optimisation: 1. Identifying bus messages to...
Hello GDoor Community, I’m very interested in using the GDoor adapter with my Gira TKS system, but I currently don’t have the tools or experience to assemble the hardware myself....
Does anyone, preferably from Germany, have a spare bus adapter lying around? If not, I may proceed with an order. If you're looking to source one through me, feel free...
Very interesting project and really great work that you are doing here. One question from my side: Is it possible to identify the key card that opened the door? I...
Hi gDoor Community, I have recently installed a gDoor adapter v3.1 and connected it to HA. Everything works fine, but I have 2 issues and would like to get your...
Install my GDoor today, in the beginning I had a little bit trouble regarding the Home Assistant integration and the logbook entries mentioned in the documentation. I had no logbook...
