Diego Garcia del Rio

I am have a slightly different accoustimass system (lifestyle 12) and my control center is half dead. My subwoofer has a slightly different connector (its a regular DIN instead of...

Im still trying to figure out the encoding to be honest. But I think we can just dump the commands in a format similar to the "raw" format similar to...

Here are some images of the traces I captured last night. The narrow pulses are 1msec in width and the wide ones are 2msec. The long pulse down at the...

I though it was bi-phase but if you look carefully, there are no "long" zeros (other than the start and stop bits). So far, it seems to be more a...

For example, using the encoding I described above, and SSSS being the 8-msec long Start bit and TTTT the 2msec stop bit, these are the keys for volume and surround...

I don't think you need your first "+8000" part on the signals.. basically the line is always idle at +5v (it's pulled up by both the accoustimass and the console...

But just to clarify, all those commands were captured between the Accoustimass sub and the music center and my objective is the same as yours, being able to control an...

And one more thing.. it seems I need to capture the "OFF" key again!.. damn... if you look at the timestamp, I copy-pasted the same dump as mute and not...

From everything I saw the amp switches on with any of the source commands or the command shown as 131 on the decode. I still need to test it. I...

The following is the capture for power off (which was missing from the capture) 17:42:27.368 -> --START|SSSS|, +2000, -1008, +996, -1008, +996, -1012, +1996, -1012, +1996, -1012, +1996, -1012, +1996,...