No repeaters/gateways linked

[K0AVN]

G4KLX Team,

I have tried installing the YSF Reflector software several times on a pi3b with Stretch and on a debian online server but each time all I get in the log is "Starting YSF Reflector - 20201124" followed 2 minutes later by "No repeaters/gateways linked".

I used the automatic install from the YSFRelector.de page and did all the commands it told me. The room shows up on the Pi-Star list as US-JARA-KS (room: 51030). I can connect directly from my radio but it kicks me off after a minute. I cannot connect via Pi-Star. Also, when I'm "connected" via the radio it doesn't show in the log and I cannot hear people if they connect when we tried testing it. Below is a sample of my issue. I also believe there was someone who had a similar problem about a year ago with no resolve. I have also opened my port 42015 in the firewall. The pings get through no issue. I don't believe it's a firewall problem since it gave me the same issues with the online server when it didn't have a firewall or port forwarding.

Any advice or help would be greatly appreciated.

I: 2021-01-12 23:27:55.433 Opening UDP port on 42015 M: 2021-01-12 23:27:55.434 Starting YSFReflector-20201124 M: 2021-01-12 23:29:55.473 No repeaters/gateways linked M: 2021-01-12 23:31:55.511 No repeaters/gateways linked M: 2021-01-12 23:33:55.538 No repeaters/gateways linked

Respectfully,

Dave K0AVN

[dg9vh]

Is your used port (42015) reachable via UDP from internet-side? This behavior looks like an firewall blocking or simply ignoring the UDP-traffic.

[K0AVN]

Kim,

For right now I have figured it as something to do with my firewall and Spectrum internet. I have opened up the firewall through their program but I believe it was not truly opened.

In the meant time I’ve overcome the problem by using an online server as a temporary fix. I’ll be moving this summer and will most likely have a different ISP. I’ll try again then. Thank you!!

Cheers!

Dave K0AVN

On Jan 27, 2021, at 16:52, Kim - DG9VH [email protected] wrote:



Is your used port (42015) reachable via UDP from internet-side? This behavior looks like an firewall blocking or simply ignoring the UDP-traffic.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/g4klx/YSFClients/issues/242#issuecomment-768631345, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ASOJD3WKPL2KFTP3HK55F73S4CKKVANCNFSM4WADS5TA.