MMDVMHost
MMDVMHost copied to clipboard
g4klx
The host program for the MMDVM
MMDVMHost does not establish a new connection after losing the connection to a dmr-master (ipsc2). [DMR Network] Type=Direct Log shows: E: 2021-03-05 13:19:37.225 DMR, Master is closing down M: 2021-03-05...
Hi, after testing a lot we found that the actual OVCM implementation has some severe issues and does not work anyway - fist the issues, what is more critical :)...
Hello everybody. Our MMDVM FM/DMR/YSF repeater has the CW identification as its only beacon. It has been connected to a YSF reflector for a few weeks and we realized that...
Hi everyone, I'm almost done setting up MMDVM on a fresh Raspbian bullseye installation. This distro has no support for python2 and it's impossible to get python-serial from apt-get: `Package...
Hia, yesterday I discovered that MMDVMHost isn't physically transmitting pocsag-information while showing texts correctly on a Nextion-monitor. Replacing the compiled executable with an older version from May 2020 it works...
Hi Jonathan, I assume the bits and bytes from trellis decoder are in reverse order which may wrong... This is true for data from both the MMDVM and the network....
Today I rewrite my MMDVM.ini and I found this problem. ``` I: 2022-03-20 12:18:24.336 Started the DMR Id lookup reload thread I: 2022-03-20 12:18:34.332 Opening UDP port on 62032 E:...
Hi all, Is there a way, or can there be a way, to specify the desired baud rate for local POCSAG paging? Best, Chris
Hi, does somebody tested mmdvm-host on new raspberry pi 64bit bullseye OS ? Z32IT
Hello, The communication stops sometimes when ID file reloaded. no timeout for opening the MMDVM and in case of error it waits forever. I: 2021-06-27 16:19:37.452 Loaded 194239 IDs to...