John Melton

Not a sever error unless it is continuous, It is caused by the Raspberry Pi (or whatever it is running on) running some other task that is causing a delay...

I will need some information from you about the hardware. Can you let me have the details of the hardware you added, preferably the schematics. How have you connected up...

It is really hard to know what is happening. Can you give me access to your code so I can look at it?

With the default setting PureSignal should be working perfectly. It does using the current piHPSDR code with both Portocol1 and Protocol2. On protocol 1 it does work best at 192000...

I have also tested the code running protocol 1 and protocol 2 on my ANAN-8000DLE which uses the Orion Mk II card. It also works well on my ANAN-100D using...

Can you contact Kjell [email protected] who will try to help you as he was the author of these. -- John On Wed, 9 Dec 2020, 12:42 hb9trt, wrote: > I...

I think my latest push fixes the problem. I have not had time to do a lot of testing. It was not just the Hermes Lite that had the problem....

Push source code fix. The error message is not a critical error in the sense that it does not stop the application running. It is caused but removing the waterfall...

Can you send the debug output. The problem seems to be in the display of local audio output devices. Can you also let me know what Linux distribution you are...

I do not have a RedPitaya so cannot test, but it is working OK with my ANAN-100D, ANAN-800DLE and Hermes board.