Franco Venturi

@SDRplay @vsonnier Thanks for the very useful and insightful comments, Andy and Vincent! I think Andy's last comment about trying to keep things simple and give the user fewer but...

@jketterl Thanks for the feedback Jakob! As a developer it is very useful for me to see other people's perspectives, understand how the driver is used, and how to make...

@jketterl Thanks Jakob for your feedback. On the high sample rates (i.e. above 2MHz) the current approach of fsHz=<sample rate>, Zero IF, and decimation factor=1 should work just fine, and...

Given all the ideas and suggestions, I thought it would be useful to proceed a step at a time, so for now I just implemented only those four additional sample...

Quick check with this group on the testing of these changes. Franco (@frspin) and John (@g0orx) both reported that the additional sample rates work with linhpsdr. Unless I hear any...

@vsonnier, since the topic of this issue (adding a few extra sample rates) and the right way of handling the errors are (almost) orthogonal, I suggest that first I complete...

I merged these new extra sample rates into master. I also created a new issue here: https://github.com/SDRplay/SoapySDRPlay/issues/19 to discuss how to best handle errors due to invalid selected values and/or...

Thanks for opening this PR, David. If I remember correctly (I had even forgotten about creating https://github.com/pothosware/SoapySDRPlay3/issues/10 a while ago. thanks for finding it), the values for the 'lnastates' and...

@dlaw Now that I am done with the other issue about the selection of the RSP device using the serial number (https://github.com/pothosware/SoapySDRPlay3/issues/23), I am ready to address the improvements to...

Thanks for your feedback @nmaster2042 I think you and @dlaw have a very strong point about the gains being exposed in dB. Even more importantly, since this is a SoapySDR...