It works with "Ariston CLAS EVO" with "Cube S Net"

[geldelo]

Hello. Thanks for the integration, it works great. But at the moment I really miss the integration of the outdoor temperature sensor, which is connected to the boiler and showed the temperature outside in the integration from https://github.com/chomupashchuk/ariston-remotethermo-home-assistant-v2. Huge request to integrate this option.

[fustom]

Hi. On the device info page do you see GALEVO or VELIS? If the first, it should work since v0.8.0.

[geldelo]

Hi. On the device info page do you see GALEVO or VELIS? If the first, it should work since v0.8.0.

Hi. I see "GALEVO", but can't find info about temperature outside. Help plz.

[fustom]

@geldelo Is this still an open issue? Do you use the latest version?

[Antonio-di-Houten]

@fustom I have an "ATAG One Zone" Thermostat (AOZT). It shows in HA via the It HACS Ariston Net v3 integration as: "GALEVO door ariston Firmware: 122.35.69B" ("door" = "by" in Dutch language). "Ariston outside temp." is visible in HA. On the AOZT there is a option to connect tot the internet Atag/Ariston Website. If you do this and your location is correct you get the OUTSIDE temp. in the thermostat and then in HA . See also below picture where "Artiston outside temp." is at right site, upper box. So maybe @geldelo has this mentioned "internet" option OFF ?

I think The "Cube S Net" from Ariston is not "exactly the same as my AOZT (ATAG has a CUBE model too which differs from the AOZT) . I have written a user review on tweaker.net in Dutch where I also describe how to connect the AOZT to HA via HACS Ariston Net v3 integration. There are lot of pictures for those who are interested and do not understand the Dutch Language. You can also try translate option in browser. Review (in Dutch): https://tweakers.net/productreview/310098/atag-one-zone.html