hautomo

hautomo copied to clipboard

Home automation hub built to serve my specific requirements.

Due to Golang runs pretty much anywhere, but some specifics work best with a Raspberry Pi.

Features

• Powering devices on/off. Alexa: tv on, amplifier off
• Color of lights. Alexa: set kitchen lights to yellow
• Dimming lights. Alexa: dim kitchen lights to 50 percent
• Controlling playback. Alexa: pause computer (context dependent, f.ex. pauses/resumes Spotify, YouTube or Netflix)
• Routines (via Alexa), for example every weekday morning turn bedroom lights on, read news and weather.
• Infrared remapping (receive via LIRC, transmit via Logitech Harmony Hub). Dedicate any remote to use with your home automation. When remote button pressed, send IR signal to a device not originally controlled by that remote.

Supported integrations

• Voice control for all of this (via Alexa)
• IKEA Trådfri lights and Trådfri wall sockets
• Infrared devices (via HarmonyHub)
• Custom 433 MHz power sockets (via custom hardware attached to Particle)
• Computer (via EventGhost)
• Happylights
• MCEUSB (via LIRC)
• Logitech Harmony Hub
• Wall power sockets (via custom hardware)

Adapters / sensors architecture

Configuring

Configured using HCL syntax. Example config file:

(TODO: some of the options here are outdated)

adapter {
	id = "sqs"
	type = "sqs"

	sqs_queue_url = "https://sqs.us-east-1.amazonaws.com/1234567890/HomeAutomation"

	sqs_key_id = "AKIAIDJJXAOTADKM"
	sqs_key_secret = "..."
}

adapter {
	id = "harmonyHubAdapter"
	type = "harmony"

	harmony_addr = "192.168.1.153:5222"
}

adapter {
	id = "lirc"
	type = "lirc"
}

device {
	id = "c0730bb2"
	adapter = "harmonyHubAdapter"
	adapters_device_id = "47917687"
	name = "Amplifier"
	description = "Onkyo TX-NR515"
	power_on_cmd = "PowerOn"
	power_off_cmd = "PowerOff"
}

device {
	id = "7e7453da"
	adapter = "harmonyHubAdapter"
	adapters_device_id = "47918441"
	name = "TV"
	description = "Philips 55'' 4K 55PUS7909"

	# for some reason the TV only wakes up with PowerToggle, not PowerOn
	power_on_cmd = "PowerToggle"
	power_off_cmd = "PowerOff"
}

devicegroup {
	id = "cfb1b27f"
	name = "All devices"

	device_ids = [ "c0730bb2", "7e7453da" ]
}

ir2ir {
	remote_key = "KEY_VOLUMEUP"
	to_device = "c0730bb2"
	ir = "VolumeUp"
}

ir2ir {
	remote_key = "KEY_VOLUMEDOWN"
	to_device = "c0730bb2"
	ir = "VolumeDown"
}