fs30000

> > Ok, so does the mt7921 driver/module support wpa3? > > Yes. In fact, all in-kernel drivers that I have tested support WPA3. That includes adapters all the way...

So now the card works. No idea why it started working. Anyway here is my hostapd.conf file. ````# interface=wlp4s0 bridge=br0 driver=nl80211 ssid=teste wpa_passphrase=12345678 country_code=PT auth_algs=3 macaddr_acl=0 ignore_broadcast_ssid=0 wpa=2 rsn_pairwise=CCMP wpa_key_mgmt=WPA-PSK...

Ok, but i'm giving up on this card. I guess the drivers are still bad. I used the 6.2.1 kernel and latest firmware. The connection is kind of "funky", also...

So, ok. My end goal is to set an AP. 5Ghz only. Decent speeds, decent pings. I have 3 devices i can use: - MT7922 m.2 card (i said before...

The problem with the mediatek stuff, was not the bands. I was using the same hostapd.conf file i use for the tplink adapter, just with ht and vht settings specific...

> > The chip is supposed to support wifi6/ax. > > It does. > > That does not mean it is easy to configure for those without a high level...

Ok, i got news. After the comfast fiasco, i decided to give this card another try, because i saw on the kernel changelog some changes were made to the mt7921...

Even tough, iw list shows this card supports 160Mhz and 80+80, it fails with vht_oper_chwidth=2 and 3, for 160Mhz and 80+80 Mhz respectively. ```` Configured VHT capability [VHT_CAP_SUPP_CHAN_WIDTH_MASK] exceeds max...

> What is "normal" and "reverse"? How do you get MB/s from iperf, I get Mbit/sec. I'm talking about iperf3. iperf3 -f M -c server will show in MB/s. In...

Yes, 36 works here. In the begining it was failing because i did't have the right config done. I have it now, working fine. However just wifi5, no AX. For...