openocean

openocean copied to clipboard

NodOn MSP-2-1-11 MicroSmartPlug

3

Hi, I try to teach-in the NodOn MicroSmartPlug without any success for hours now. I hope you can help. openHAB: 2.5.3 212 │ Active │ 80 │ 2.5.3 │ org.openhab.binding.enocean...

HarterHorst

Hi guys! Is there a opportunity to set shutTime not as a value of unit “seconds” but of unit of “100ms”? This would make it possible to open the blinds...

m61s

Improve support for thermostats

2

Add support for: - [x] Virtual room operation panel: sends EEP A5-10-06, temperature channel should be linked with follow profile to another temp channel, setpoint channel is modifiable - [x]...

fruggy83

Hi Daniel, I got the OPUS actuator somehow working. I used the Dolphin software to commission the device and pair it with my Openhab installation. However the D2-05-02 profile is...

kirscheGIT

Fully support for Eltako FMS55ESB / STM 550 S6201-K516 Enocean Multisensor - EEP D2-14-41

7

Hi Daniel I did some tests with the Eltako Enocean Multisensor FMS55ESB with the OH3 enocean-binding. I realized that only the EEP A5-04-03 (temperature/humidity) and A5-06-01 ELTAKO (lux) are working....

tokest

D2-11-02 (Thermokon SR06 thermostat with humidity)

1

Please add support for D2-11-02 for Thermokon SR06. Compared to D2-11-01 that is already tested and implemented this would add the reading of humidity value.

ratiomatic

Create Generic Thing missing?

2

Hi, if I remember correctly it was possible in OH2 to create a generic thing with the GUI to use unsupported EEP‘s. Is this option not longer available in OH3?...

diRk262

Can't intialize bridge via rfc2217://x.x.x.x:3001

4

I have a Raspberry with an EnoceanPi and ser2net running. The config has the following entry: `3001:raw:600:/dev/ttyAMA0:57600 8DATABITS NONE 1STOPBIT remctl` At another Raspberry I have openHab with the binding...

nimric

Openocean v3.1.0.0.jar doesn‘t work with OH 3.1

6

Hey Daniel, I just updated my OH to 3.1. Unfortunately your latest .jar v3.1.0.0 doesn‘t work anymore. Could you please compile a new version which works with OH3.1? Looks like...

diRk262

Transformation of generic thing channel stops working

7

I have setup two generic enocean things in openHAB (only these two) and I use a JS transformation to transform the messages 1:1 from the device to the string channel...

DrRSatzteil