Preview of part in the inspector pane (small icons) does not show sch text in SCH icon and silkscreen in the PCB icon

[failiz]

Current Behaviour

The icon views at the inspector pane are not rendered properly when the part is selected, but they are when hovering over the part pane.

Steps to reproduce:

• Open Fritzing and puth the mouse over a potentiometer.
• Check the inspector pane: You can see the tree small pin numbers in the SCH icon and the silkscreen on the PCB icon. OK!
• Drag the icon to the schetch.
• Select the pot in the sketch and look the inspector pane: Now the SCH icon does not show the three small numbers and the PCB icon does not show the silkscreen

Expected Behaviour

The behavior should be homogeneous and not depend if a part is in the sketch or not. The silkscreen must be displayed. If not a resistor or a capacitor are very similar or identical. SCH text should probably be also rendered as if not, a lot of the icons will be empty boxes (select for example the humidity sensor in the core bin).

Resistors and capacitors

In the case of resistors and capacitors (and maybe others), the silkscreen is not visible when hovering over the part (without being in the sketch).