OpenSCADutil

OpenSCADutil copied to clipboard

Really finding this library useful, managed to create just about everything I need but I wanted to ask if there is a way when your using the Straight Hook to...

stuart264

I wanted to be able to make long narrow holes in series for a set of cheap leather edgers: https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcRJayHYGx7U-5UAZRcCL0a_uGkqD6n5UHPx9w&usqp=CAU  I don't love this approach, but it was by...

blackmad

blackmad

Gap between box and holding tray

6

Hi - this is really good and although I'm new to OpenScad I've already started playing about with it. One thing I'm not clear on - how do I increase...

Xiondewah

I added the squared holder, a squared version of U holder

MiguelAngelLV

If got a gap in the box when i changed the nozzle width to 0.8. Thank you very much for the project Michael 

mik79

Modificaton to skadis_bits_serie, add spacing

1

Hi, I'm not sure how to do a pull request but I'll add the modified file: [ikea_skadis_erwin.scad.zip](https://github.com/franpoli/OpenSCADutil/files/13693908/ikea_skadis_erwin.scad.zip) It gives the option to do a spacing in both x and y...

ErnieV

Hi, firstly love the library and appreciate the work, The issue I've found occurred when i printed off a 40mm wide "squared holder" and found that its dimensions were out...

James-Gherbaz

allow for squared corner plates?

2

I've got some items that would work better on squared-corner plates, instead of rounded. In poking through the code I can just brute-force change line 599 from cylinder to cube,...

wkearney99