BPI-Router-Linux
BPI-Router-Linux copied to clipboard
Linux kernel 4.14+ for BPI-R2, 5.4+ for R64, 6.1+ for R2Pro and R3
https://github.com/frank-w/BPI-R2-4.14/blob/2e651881b14cfd52ec02f99c436d99c10ea8a420/drivers/misc/mediatek/connectivity/Makefile#L23
Have no idea why ACL's does not work, but it is kinda might be useful for network storage part of f-ty. ``` # dmesg | grep acl ... [1334842.283671] EXT4-fs...
When both mt7530 and mtk_eth are built as modules, probing for mt7530 fails with error: ``` mtk_soc_eth 15100000.ethernet: mdio: MDIO timeout mdio_bus mdio-bus: failed to read mt7530 register mtk_soc_eth 15100000.ethernet:...
Board: BPI-R3 sfp sfp-1: module OEM SFP-2.5G-T rev 1.0 sn REDACTED dc REDACTED ethtool looks like something it connected, but the link is always down: 3: eth1: mtu 1500 qdisc...
Notice the hostapd.conf file extract below. All the lines that are commented out with # are not recognised on 6.9-rc but are recognised on openwrt for the BPI-R3. I don't...
Quick question: does your R3 solution also work for the R3 Mini? https://wiki.banana-pi.org/Banana_Pi_BPI-R3_Mini What is the best way to install Debian on that device?
Would you please show some samples about how to populate spi devices under /dev for a bpi-r2-pro board? Here is what I have done (but failed) changed status from "disabled"...
Hello, When i try to create a LV i have an issue : ```bash root@bpi-r3:~# vgs VG #PV #LV #SN Attr VSize VFree os 1 0 0 wz--n-
Hi Frank, Testing the 6.3-rc branch I noticed the SFP's stopped working, any fix for this? Thanks
Is it possible to turn that feature on in the kernel? some IPv6 implementations of some ISPs hand out an address that isn't routable and when used by default causes...