grbl-Mega-5X
grbl-Mega-5X copied to clipboard
fra589
5/6 Axis version of Grbl, the open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560
Hello all, I'm using a DM556T driver and apparently it needs to be enabled 200ms before any movement. Otherwise it does some glitch in the beginning and some steps are...
I have my Prusa 3D printer with an Arduino Mega and a RAMPS 1.4. I just bought a laser from China and I would like to use my hardware setup...
bonjour j'ai un problème de connexion avec mon arduino mega 2560 origine elle est reconnu sur lasergrbl sur cn5x++ mais pas sur lightburn sur cn5x++ au démarrage elle m'affiche ce...
Hi! I'm having some issues with duplicate axes that might be bugs. My machine is set up as a 5 axis machine with 3 of them being configured as part...
Hello community members, I'm currently facing a unique challenge with the A-axis on my CNC machine running Grbl, and I'm seeking insights from the community. Observations: The interruption of the...
I made custom board for Atmega2560 grbl controller for my hobby machine. I used pinouts shown in the bottom picture. It worked fine with grbl/Mega. I need 4th axe so...
for example if my machine has laser and spindle. is changing between "laser mode" will worn out the atmega EEPROM in long run?
### Discussed in https://github.com/fra589/grbl-Mega-5X/discussions/308 Originally posted by **gpstone** November 18, 2022 Hello. I am stuck and need some help on a strange issue where GRBL is ignoring axis acceleration value...
I recently revisited connecting NO limit switches to my 5 axis cnc. Currently I seem to get proper feedback in the ui and cli that a limit switch was hit....
I intstalled de mega 5x grbl on my arduino mega. When I look at it in the serial monitor it looks fine to me. If I would like to control...
