Msp-osd in Inav

[Ben-Stevenss]

In the ports tab you have to select hdzero, does the msp also need to be switched on?

somehow i can’t seem to switch msp and hdzero on together.

I have the osd working/running but the elements are wrong/messed up. Some are ok bu tmost are not. and yes i tried going in the menu with stick command and back.

[bri3d]

No, MSP should not also be switched on, just HDZero VTx.

What fonts do you have on your SD card, if any?

[Ben-Stevenss]

Impact mini renamed to font.

But the one from the betaflight folder. Did a couple of betaflight quads, and a few days later tried my inav wing. Can try the inav font?

[bri3d]

Yes, this will be why, then. Need to use font corresponding to FC in use. I will add a feature to ID the FC and use different fonts at some point soon here.

[Ben-Stevenss]

So at the moment i can't use betaflight and inav together?

[bri3d]

One trick for this is to use iNav in HD mode, and use an iNav font as the HD font (font_hd and font_hd_2) on the SD card. Then leave your "normal" font as a Betaflight one.

[bri3d]

Down the road, I plan to add FC detection to determine which fonts to use.