Frederic Pillon
Frederic Pillon
No. I will check when I will have some time.
Hi @miroslavpetrov I've reproduced and try to debug deeply but hard with this series as debug with low power mode is a nightmare (several issue document in the errata sheet)....
Hi @dansiviter please, could you make the PR for this? Any contribution are welcome.
You have to enable USB CDC and use the com port created.
you have to flash it first, then select the new com port created.
As stated here: https://github.com/stm32duino/Arduino_Core_STM32/wiki/Upload-methods#maple-dfu-bootloader > [!WARNING] > USB CDC have to be enable else you will not be able to upload automatically as bootloader reset sequence are managed through the...
Com port is only used to reset in Maple DFU mode. As said after the first flashing of the bootloader, your board should be in this mode. But it requires...
Hi @marshfolx Feel free to provide a PR then it could be reviewed and discussed.
Hi @jmole STM32N6 is more complex than other series. Due to external memory requirement, security and usage. Currently, I've not planned to work on it. Anyway any contribution are welcome...
Hi @swapnilsayansaha Which board specifically?