foxthefox

It is now easier with Version 1.4.1. You can configure the plug in the respective section and we will see what comes in the log. You still need to enable...

Which version of the adapter do you use? With >=1.3.1 there were improvements for reconnection to the MQTT server for HA communication. That worked so far. The message: ``` ecoflow-mqtt.0...

I have created a new version 1.4.0 on npm and git (to be installed via expert mode). The HA interaction should be now improved.

Please have a check with version 1.4.5, where further improvements were done

Thanks for the feedback. Unfortunately I can not reproduce this behavior. Can you verify that you have configured birth and last message in HA MQTT. 

From my point of view the value is 10 times higher than the anticipated value, so the multiplication factor needs to be adapted in the code. I will do this...

I have created a preview of the next version. Could you please check it. it must be installed via expert mode -> custom, described here: https://github.com/foxthefox/ioBroker.ecoflow-mqtt/blob/1.4.0/doc/en/IOB_HA/adapter.md#new-version-for-testing-on-github-not-main-branch after installation you need...

I have created a new version 1.4.0 on npm and git (to be installed via expert mode). Can you crosschek once again with the latest version? Finally with Version 1.4.1...

deklarier den mal besser unter unknown und nicht als smartmeter, das führt zu Abstürzen, weil die Datenformate sich nicht vertragen.

OK, der sendet nicht im protobuf Format, sondern JSON. Habs mal umgeandelt: {"src":"ecoflowpro3em-exxxx,"dst":"ecoflowpro3em-ecxxx/events","method":"NotifyStatus","params":{"switch:0":null,"deviceInfo":{"name":null,"id":"ecoflowpro3em-exxxx","mac":"Exxxx","slot":0,"model":"EFPEM-003CEBEU120","gen":2,"fw_id":"20250730-063258/1.7.0-gbe7545d","ver":"1.7.0","app":"Pro3EMEF","auth_en":false,"auth_domain":null,"profile":"triphase"},"wifiConfig":{"ap":{"ssid":"EcoFlowPro3EM-Exxxx","is_open":true,"enable":false,"range_extender":{"enable":false}},"sta":{"ssid":"Whitestar1","is_open":true,"enable":false,"ipv4mode":"dhcp","ip":null,"netmask":null,"gw":null,"nameserver":null},"sta1":{"ssid":null,"is_open":true,"enable":false,"ipv4mode":"dhcp","ip":null,"netmask":null,"gw":null,"nameserver":null},"roam":{"rssi_thr":-80,"interval":60}},"wifi":{"ssid":"Wxxxxx,"is_open":true,"enable":false,"ipv4mode":"dhcp","ip":null,"netmask":null,"gw":null,"nameserver":null}}} Das einzige was hier verwertbar ist, ist die Signalstärke vom Gerät.