foxthefox

You need to activate expert mode in adapter page, then there is the octacat icon one there you can use non or GitHub to install 1.3.2. In the readme of...

The details are here https://github.com/foxthefox/ioBroker.ecoflow-mqtt/blob/main/doc/en/IOB_HA/adapter.md

So the version was too old, better to have it already at 1.3.2 😎 Yes I would need the log from the Delta3 since in most cases there are slightly...

I have a load reducing algorithm inside the adapter. Data is only sent when the value is different to the stored one. So only after receiving new data with different...

It is a similar problem which can occur. But here I think it is even different. Since the “not available” comes only if there is no Mqtt connection. But usually...

Ack=true is a feedback and this value change is confirming a setting. Ack=false is a command. So when in HA the value is changed it is incoming to iobroker as...

no, only the debug mode. you need to go to instances and then to the ecoflow-mqtt config (wrench symbol) and in the header you can change the mode, see here:...

The log must not be very long, some minutes are usually OK. It should contain some get_reply and update telegrams. You may also include already some commands. For the capturing...

Thanks, got it. There is still this subscription error which most likely is also causing the problem with making commands. "2025-04-22 12:24:50.945 - warn: ecoflow-mqtt.0 (734) could not subscribe to...

What you need to make the flow working is a different AndroidID than used in the adapter. If you have before not used the userId, that would explain why the...