Jozsef Kiraly
Jozsef Kiraly
Apologies for the late reply, have been fighting a nasty ear infection and had no chance to test things further. I did remove all permissions and the old version of...
Whelp, no luck. 1.1.0 installed, confirmed working (debug logging appeared, and I've managed to take a look at the logs as well), but alas, still the only time it works...
I too am running into this issue, also on fedia.io, using the iOS client. The only way I found to counter this issue was to force a full login-logout cycle...
Would it also be possible to specify if overlays like no-go zones should use a pattern (as shown above) or solid colour, once the alpha rendering is fixed?
@sca075 just did a quick test - sadly it hasn't gotten much better. White line for movements, on a light blue background, with ~30% alpha results in a dark grey...
Looks much better so far! Can't wait to try it on my end 🙂
Ah, I see it now - HACS seems to be somewhat broken on the latest 2025.05b HA Core.
I was getting absolutely no output on UART. Turns out that the model I have was missing one of the resistors next to the UART pins - a quick solder...
@Gerrett84 I'm also on latest firmware, as per my initial post (same 4.0.6 version). Does your G4 react to any input after boot? If not then your board too is...
Unfortunately with that I cannot help much. For me the best tactic was doing the following: - Plug UART adapter into host machine and connect pins - Open UART terminal...