Gear lights on Honeycomb Bravo not working correctly

[ntlgr]

Aircraft Version

Development

Build info

{
    "built": "2024-04-24T17:04:51+00:00",
    "ref": "refs/heads/master",
    "sha": "c989ce225b7a6c201346dfc73609ea45eb203ff0",
    "actor": "frankkopp",
    "event_name": "manual",
    "pretty_release_name": "master:c989ce22",
    "version": "a32nx-v0.12.0-dev.c989ce2"
}

Describe the bug

The main gear lights on the Honeycomb Bravo throttle quadrant, are affected by the landing lights. When landing lights are on, the main gear lights show red. This started since early April on the Dev build and is still the case. That was not the case before in Dev builds until at least early March, and has never been the case before. I am assuming that it is somehow linked to the extendable landing lights - the extension of the landing lights is being picked up. Honeycomb has not changed their software or driver for over a year.

Expected behavior

Gear down - 3 greens Gear on travel - 3 reds Gear up - all lights off

Steps to reproduce

1. While taxiing and on takeoff - 3 greens on the Honeycomb Bravo
2. After takeoff, pull the gear up - 3 reds
3. Once gear is up - 2 main gear lights stay red
4. The 2 reds turn off only when landing lights are turned off.
5. During approach, the 2 reds turn on again when you turn on landing lights.

References (optional)

No response

Additional info (optional)

No response

Discord Username (optional)

No response