Engine 1 N1 drops to 20-23% or some screens go black after take off.

[Alex07d]

Aircraft Version

Stable

Build info

{
    "built": "2022-06-18T02:11:53+00:00",
    "ref": "refs/tags/v0.8.2",
    "sha": "5cfa8478aea0fd20ae4a3e6f624714d0e04fab60",
    "actor": "Benjozork",
    "event_name": "manual",
    "pretty_release_name": "stable/v0.8.2"
}

Describe the bug

When I take off, after some seconds in the air, either engine 1 N1 drops to about 20-23% or all screens go black apart from the left screens with a double total engine failure. If you try to restart the engine it will turn on, and after you give him power it will fail again.

Expected behavior

Once I take off the engines should be running without problems and the screens should stay on.

Steps to reproduce

Select an airport and set it as your departure. Once it's loaded, start to take off, and after some seconds in the air you will encounter this bug.

References (optional)

Additional info (optional)

No response

Discord Username (optional)

Alexd00770#1728

[sidnov]

Do you have assistance settings on? Sometimes they tend to activate without any user intervention.

[Alex07d]

Do you have assistance settings on? Sometimes they tend to activate without any user intervention.

I tried to turn all of them off but I still have the same Issue. First, engine 1 drops to 20-23% RPM, and then the screens go black as you can see in the images. I also noticed that I get an Electric Hydraulic Pump failure and the voltage of both batteries goes to 27.0V. I then restart the APU and the electricity return with a voltage of 28.0V.

[nicoca-ine]

Hi, having similar or same problem. NB: AUTO-RUDDER option OFF

activating engines taking lot of time, and GEN 1 and 2 are faulty. After trying to put APU off, having eletrical error, all is turned OFF. Need to start APU again but some devices remains off.