fix: reverse thrust toggle/hold

[erick0z]

Fixes #7382

Summary of Changes

This small fix changes the behaviour of the reverse thrust toggle. When a the reverse thrust signal is received (either hold or toggle), the reverse thrust lever goes all the way down (-20). This fix support controllers that uses this action with a toggle button or holding it, instead of flipping the thrust axis (current behaviour). This change is for support throttle quadrants that have a toggle/hold button at the end of the throttles axis travel like the Logitech/Saitek Pro Flight Yoke and Honeycombs (I'll update as I investigate more quadrants). This work as well with any other controller/joystick that triggers this action with a button and/or the keyboard (Not bound to axis and/or axis detents).

Screenshots (if necessary)

References

Additional context

Discord username (if different from GitHub): ecardona#9232

Testing instructions

1.- Disable "Reverser on axis" on throttle calibration page 2.- Set Throttle to idle 3.- Toggle or Hold Reverse thrust with a button.

How to download the PR for QA

Every new commit to this PR will cause a new A32NX artifact to be created, built, and uploaded.

1. Make sure you are signed in to GitHub
2. Click on the Checks tab on the PR
3. On the left side, click on the bottom PR tab
4. Click on the A32NX download link at the bottom of the page