flosoft
Connection to iphone app
I'm running into an issue using the mobile app. My setup is as follows:
I'm running docker-joplin-server on a Proxmox VM. I’m also running nginx-proxy-manager on the same docker stack. I point “joplin.custom.domain” to the ip address of the docker VM. I’ve set up the Joplin windows 10 app on two devices and used “http://joplin.custom.domain”. This has worked wonderfully and I’m very pleased. I do not have any ports open and am only using wireguard for remote access.
The issue I have is that when I put the same address into my iPhone app, it gives a connection error. I read somewhere that it requires https to work, but if I test using the IP of the VM (“http://192.168.10.102:22300”) it works. I suppose I could change:
- APP_BASE_URL=“https://192.168.10.102:22300”
Is there a way to make this work without using https or without setting the base url to the IP and port?
I ended up just using the ip of my vm with the port (http://192.168.0.1:22300) and got it working. This will suffice for now until I can work through the reverse proxy.
- Ben Wagner
From: Florian Jensen @.> Sent: Sunday, January 7, 2024 2:44:46 AM To: flosoft/docker-joplin-server @.> Cc: Benjamin Wagner @.>; Author @.> Subject: Re: [flosoft/docker-joplin-server] Connection to iphone app (Issue #32)
I'd recommend using a reverse proxy in front such as Traefik.
— Reply to this email directly, view it on GitHubhttps://github.com/flosoft/docker-joplin-server/issues/32#issuecomment-1879995213, or unsubscribehttps://github.com/notifications/unsubscribe-auth/APJCNFIANMZ6FNQX5ANYCD3YNJN75AVCNFSM6AAAAAA6WPEMWSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNZZHE4TKMRRGM. You are receiving this because you authored the thread.Message ID: @.***>