Badbutton detection for Somfy Telis remote

[costimasca]

Describe the bug.

No matter what button I press on my Somfy Telis remote, Flipper will always detect the btn to be 0x0F.

Reproduction

1. Go to SubGHZ
2. Go to Read
3. Set frequency to 433.42
4. Press a button on the Somfy Telis remote
5. Press another button on the Somfy Telis remote
6. Check the 2 decoded records - they will have the same code for the button

Target

No response

Logs

No response

Anything else?

No response

[Skorpionm]

No, it won't, the decoder was written from the original remote control, what is your remote control? and what is the firmware

[skotopes]

@costimasca also can you provide recording of each button in RAW format?

[costimasca]

Firmware used: latest = 0.78.1

I've attached 2 buttons: up and down.

More info: When using normal Read, the counter and the key do increase on each button press. Still, no matter what button I press, the Btn value is 0x0F.

I've also attached a picture of the remote. Not sure if it's original or just Somfy compatible??

Archive.zip

[Skorpionm]

here is the original., I will look at your entries

[skotopes]

Please reopen if your issue is still there

[trueVinton]

Hi @skotopes, I am currently facing exactly the same issue described in this thread. Can we reopen it, please?

Additional context: I tried using "Add Manually" > Somfy Telis. In this case, I can see that pressing different buttons on Flipper sends different Btn codes. However, when I edit the previously created .sub file to adjust the remote SN and run it once again, it seems to break and only sends the Btn:0x0F value for any key pressed on the Flipper. Let me know if you would like to see any diagnostic data.

[skotopes]

@Skorpionm wanna make 2nd take?