flipperdevices
Weather Station: Add Bresser 5-in-1 protocol
Description of the feature you're suggesting.
Would be nice to have support for Bresser 5-in-1 weather stations (and maybe their other ones as well) It seems like in RTL_433 they already did most of the work on decoding protocol: https://github.com/merbanan/rtl_433/blob/master/src/devices/bresser_5in1.c
I have access to one of these(technically it's a different model than mentioned in the code, but it has same outdoor unit) I can do a RAW recording if you have advice on which settings should I use for recording
Anything else?
No response
There will be RAW recordings, there will be their support. open SubGhz RAW and record 2+ messages from sensors. + set RSSI -85 in the settings and also make 2+ records (preferably on different channels if it is supported) it is also important to take a photo of what the receiver shows (temperature, humidity, channel) or RTL433. throw records for example here or on the forum, I will add support (frequency 433 modulation 650 AM)
It's on 868mhz and if I understood terms used in RTLs decoder correctly, it uses FM? Is there a way to determine if it's 238 or 476?
Yes, you are right, I didn't look at the source code in RTL. The easiest option is to write it down on both modulations. send them to me and I'll take a look. if you want to check, record the file, make the temperature change, and then play the recorded one, the receiver will return to the old temperature, frequency 868.35
I've tried recording and whatever I managed to record wasn't being recognized by receiver part of the station, so no recording. And for unrelated reasons station broke so can't try to record it again for a while anyway. I guess we can close this