flipperzero-firmware
flipperzero-firmware copied to clipboard
NFC Emulation not working anymore
Describe the bug.
It was working a few months ago. I'm not sure if it's a hardware issue due to my flipper falling hard enough to crack the screen; I didn't need to emulate for a few months after. The only thing I have to test it out on is with amiibo on my switch but I've tried with other systems/official controllers as well and nothings worked. I've tried different firmwares, amiibo file dumps, restoring my flipper and nothings changed. It can still read tags from my desk mat and my credit card just fine.
Reproduction
Read nfc tag Emulate tag Nothing happens
Target
No response
Logs
No response
Anything else?
No response
Hello @Jay4730 Could you please emulate attached file and read it with you mobile. test.nfc.zip
I saved it but my phone doesn't read it, nothing happens
Could you please update flipper firmware and run this test again? Sorry for late response
No worries on the late reply, I just updated to the newest fw and still nothing
Hi, I am having the same problem. The test.nfc
file doesn't emulate properly either. This used to work and I can still scan cards, but no matter what I emulate no device detects it. Can I enable debug logging or so?
Trace log shows:
12489191 [I][LoaderSrv] Starting: NFC
12489196 [I][AnimationManager] Unload animation 'L1_Recording_128x51'
12489217 [T][StorageAPI] File/Dir 0000C358 alloc
12489230 [T][StorageAPI] File 0000C358 - 0000D2EC open (/any/nfc/test.nfc)
12490070 [T][StorageAPI] File 0000C358 - 0000D2EC closed
12490073 [T][StorageAPI] File/Dir 0000C358 free
12490081 [D][DolphinState] icounter 168, butthurt 0
12490089 [D][MfUltralight] Prepare emulation
and then nothing
Correction, the test.nfc now works again after a reboot. I think I am running into #1768 instead.
I'll close this issue then