Florian Hofer

Yes, the US and EU use different signal coding, spread factors, have different bandwidths, and most important for your setup, US allows for up to 30dBm transmit power, while the...

Hi! The last commit contains some minor fixes to use the updates on the firmware for 242 HEX bytes send and receive. It should also fix the DR0 stuck data...

Finished tests, think I'm done here. Anything else?

@sslupsky anyone reviewing this? would solve a lot of open issues 😃

guys? @giulcioffi @sslupsky @sebromero

> guys? > @giulcioffi @sslupsky @sebromero Ping?

@Larshand92 Hi Lars. Thanks for the heads up. Are you using the matching firmware version or the 1.2.3 default? I had to fix a lot of stuff in the firmware...

Hi @hpssjellis Yes, it makes absolute sense if you want to know more about your network. The Server-side reports the signal strength of incoming data from your device. The device,...

The counters are the ones defined by the LoRa standard which are 16 bit numbers used for frame identification. See `4.3.1 Frame header (FHDR)` of the LoRaWan standard 1.0.3

@giampiero7 right, but not really.. ``` Note: Since the FCnt field carries only the least-significant 16 bits of the 32-bits frame counter, the server must infer the 16 most-significant bits...