Dynamic Relay Configuration Proposal

[screwyprof]

Dynamic Relay Configuration Proposal

This proposal summarises our take on Support Validator Account Level Relay Choice and Validator Level Relay Configuration as part of ConsenSys Codefi team responding to the features our customers requested.

Requirements

Many stakers run multiple keys on the same validator/consensus layer client. MEV-Boost, as currently implemented, requires all keys on the same node to point at the same set of relays.

The objective of this proposal is to allow stakers to specify different relays for different validators without having to increase their consensus layer client population:

Acceptance Criteria

• Different validator keys on the same validator client can point to different sets of relays
• There is no compromise on security or introduction of a new attack surface
• Minimal impact on the current latency sensitive operations of MEV-Boost
• The implementation is optional - users can continue to use MEV-Boost as they do today
• Changes to the relay set of a particular validator are adopted quickly by the infrastructure with no disruption (e.g.: restarting MEV-Boost)

Definitions

Relay Configuration Provider (RCP) holds information about validators and their corresponding relays. For example it may be as simple as a file or a remote API endpoint which returns a Proposer Config - a JSON discussed in Support validator account level relay choice issue.

Relay Configuration Manager (RCM) manages relays and their configurations. It fetches the configuration from an RCP, validates it and then populates an in memory Relay Registry which is basically a map of all the registered validators and their corresponding relay configs. The Relay Registry is then used to lookup relays for a given validator when requested.

Suggested Changes

We change MEV-Boost to:

1. Support a command line/env config flag to use an RCM.
2. Call the RCM to fetch all the relays for all the managed validators at startup.
3. Query the RCM to get relays for a given validator on every MEV-Boost API call.

When RCM is created at service startup it will try to fetch the configuration from an RCP. If this operation fails, the service will refuse to fast.

Then a background job is started to periodically synchronise the configuration. The job is optional and enabled only when proposer-config-refresh-enabled param is set to true. It will run every 3.2 mins (half an epoch). It is important to note that the Relay Registry won’t be updated if the configuration is malformed or invalid, in which case the previous valid configuration is used.

MEV-Boost then uses RCM to lookup information about relays for a given validator on every request to any endpoint (register validator, get header, get payload) via API.

Schema

Given the expectation to support multiple configuration sources, the implementation should align on a common schema. The schema we follow is the one discussed in the proposed changes and already used by Teku and available via validators-proposer-config option. The intention is to allow specifying a set of specific relays per validator and otherwise fallback to a common set of relays.

The proposer_config section contains the mapping from validator public key to the fee recipient and builder config. Inside the builder section, there is a mandatory enabled field. If true, the relays should be used by MEV-boost. If false, then MEV-Boost should ignore this key (and skip any incoming requests for this validator key).

If a validator key is not present inside the proposer_config, then the configuration inside default_config should be applied.

F.A.Q

Are the proposed changes backward compatible?

Yes they are. Using the newly introduced features is optional. At the moment we suggest a binary choice: either to use RCM or to use MEV-Boost in the conventional way.

What RCPs are supported?

At the moment we have a file-based RCP available via MEV-Boost’s proposer-config-file option and an API-based RCP configured via proposer-config-url.

What happens when the Relay Configuration Provider is down?

When RCM is used then:

• If an RCP is down when MEV-Boost starts, then the service will fail fast with an error and refuse to start.
• If an RCP is down when MEV-Boost tries to synchronise the configuration, then the error is logged and the previously valid configuration will be used until the synchronisation is successful.

What happens if the config is changed after a validator has been registered?

The changes will take effect in the next epoch.

Should remote RCP be exposed to the internet?

When using a remote RCP we strongly encourage running it in a trusted DMZ, preferably in the same network as mev-boost. We don’t expect it to be publicly available.

Test cases

Valid Cases

Proposer key	Proposer Config Builder	Proposer Relays	Default Config Builder	Default Relays	Result
Not Present	n/a	n/a	FALSE	EMPTY	No MEV used, EL block built
Not Present	n/a	n/a	TRUE	Filled	Use default relays
Present	NULL	n/a	FALSE	EMPTY	No MEV used, EL block built
Present	FALSE	Empty	FALSE	EMPTY	No MEV used, EL block built
Present	NULL	n/a	TRUE	Filled	Use default relays
Present	FALSE	Empty	TRUE	Filled	No MEV used, EL block built
Present	TRUE	Filled	TRUE	Filled	Use the proposer relays
Present	TRUE	Filled	FALSE	EMPTY	Use the proposer relays

Invalid cases

Proposer key	Proposer Config Builder	Proposer Relays	Default Config Builder	Default Relays	Result
Present	TRUE	Empty	-	-	Error
-	-	-	TRUE	Empty	Error
-	-	-	NULL/FALSE	-	Ignore
-	-	-	FALSE	Filled	Ignore

Benchmarks

goos: darwin
goarch: arm64
pkg: github.com/flashbots/mev-boost/server

Seconds per operation:

Test	Before	After	Diff
RegisterValidator-8	108.0µ ± 11	134.6µ ± 12%	+24.63% (p=0.000 n=10
GetHeader-8	1.762m ± 88%	1.792m ± 2%	~ (p=0.579 n=10)
GetPayload-8	1651.4µ ± 7%	515.4µ ± 19%	-68.79% (p=0.000 n=10)
geomean	679.8µ	499.1µ	-26.59%

Bytes per operation:

Test	Before	After	Diff
RegisterValidator-8	73.96Ki ± 1%	118.86Ki ± 0%	+60.71% (p=0.000 n=10)
GetHeader-8	180.1Ki ± 1%	225.8Ki ± 0%	+25.39% (p=0.000 n=10)
GetPayload-8	711.4Ki ± 1%	221.1Ki ± 2%	-68.92% (p=0.000 n=10)
geomean	211.6Ki	181.1Ki	-14.44%

Allocations per operation:

Test	Before	After	Diff
RegisterValidator-8	921.0 ± 0	1500.0 ± 0%	+62.87% (p=0.000 n=10)
GetHeader-8	1.842k ± 0%	2.407k ± 0%	+30.67% (p=0.000 n=10)
GetPayload-8	4.239k ± 0%	2.407k ± 0%	-51.62% (p=0.000 n=10)
geomean	1.930k	1.949k	+0.98%

[metachris]

This is pretty cool, great work! Will review in detail these days.

Btw, love the speed improvements of 25% on the side 🔥 🤠

[ralexstokes]

adding support for per-validator relay configuration is the right direction

I do wonder if there are ways to link this to the key-manager APIs https://github.com/ethereum/keymanager-APIs so we can avoid a proliferation of configuration...

sketch of proposal: extend keymanager-APIs with ability to set relay choice(s) per validator public-key expose this info for mev-boost (or whoever..!) to query

edit: I guess the keymanager-APIs could expose the RCP endpoint and we can unify that way

[screwyprof]

Hey @ralexstokes,

At the moment if the response produced by keymanager is compatible with the schema described above, then mevboost is compatible out of the box once this PR is merged. If not, we should agree on schema first.