BHSTools

BHSTools copied to clipboard

Getting rid of "Trouble" CF failure AND setting entry chimes

3

After getting access and working on this for a while we’ve had success. But after all we’re left with two problems. 1. We have a CF trouble code and a...

mixedupone

Getting rid of "Trouble" CH failure

7

Following up from our conversation on YouTube, I want to commend you that everything worked well out of the box! Following your guidance on the Wiki, I could access "Local...

vermagit

An even number of hex digits must be given.

3

I'm having trouble running this command: command.py PORT 6 0 In my scenario, this is exactly what I ran: command.py /dev/tty.usbserial-1410 6 0 I get the following message: An even...

rheide99

Panel does not receive transmitted packets under some circumstances

2

Cause is currently unknown. This has been observed with both RS-485 and UART. It's most likely not an issue with the panel, but rather with the hardware and/or software used...

flarn2006

Switch to an open-source assembler

1

I wish I knew earlier that [vasm](http://sun.hasenbraten.de/vasm/) existed. I didn't think any free tools existed for C166. Always nice to eliminate dependencies on proprietary software, plus it looks like this...

flarn2006