OpenGround

OpenGround copied to clipboard

Add support for the FrSky D16 protocol

19

lunohod

Question: Can the RF output be de-activated by software/firmware

3

Idea is to use the Turnigy Evolution in Joystick mode with 2.4Ghz video, however, I found that it's still transmitting when in USB Joystick mode. Is there a way to...

rodizio1

Evolution - bind/clone issue

8

@fishpepper, I recompiled the latest master and tested binding and TXClone again. Unfortunately I still have the same issue: Bind mode: Put the RX into bind mode (2 solid LED's),...

IdefixRC

Feature: dynamic gimbal setup (Stick-Mode, Reverse)

2

It seems that the Turnigy Evolution is delivered in several combinations of Stick-Modes where the gimbals are just swapped and rotated. I don't know, how this is done with the...

shadow974

Can a version be made that supports the stock rf module?

10

As per subject.. is it necessary to use the flysky module? For many... the stock module will be perfect - what they would want is an opensource firmware.

robthomson

After flashing the firmware for the first time the storage was not initialized correctly. Modelnames were not available and the display showed weird characters. I could fix this after using...

rav-rav

Fix crystal oscilator define and clock init 8mhz VS 12 Mhz

1

As found out in #1, both transmitters have a 8Mhz crystal. The SYSCLK define in the makefile assumes 12MHz. I need to investigate why this is working correctly with the...

fishpepper