fifonik

Well, actually I see a thumbnail in the gcode files you provided: ``` ; THUMBNAIL_BLOCK_START ; thumbnail begin 50x50 648 ; iVBORw0KGgoAAAANSUhEUgAAADIAAAAyCAYAAAAeP4ixAAABrUlEQVR4Ae2Yy2oqQRBAe6cufOALwf ; f7ragLRRD8tPmz+bS6noEKTTY3CSSpCXWgsLtnFnW6qhuZEBzHcRzHcZxcUiqVnvV6PeGXCHmj0Wgk ; y+VSNpuNbLdbWa/XslgspNvtpsVi8RnyQLPZTBDY7/dyPB7lcrnI4XDIhJCbTqdSq9WSYBkqgcRut8 ; skrter3O/3bMyaVmYymUilUkmCRTgDJMrOU43T6SSPx0Nut9ubCJJalcFgIMEivV4vfS9CRc7nc9Za ; schsNpPhcGizKv1+PxOJzwcySDDX1opFXvL2qkLvr1art5uKxFWAOet6RmgtRF7ytkS4UufzebbbsY...

I've just run the script with `--image_size=50x50` option I mentioned above and it detected the image and used it for creating thumbnail supported by Neptune: P.S. I have not tried...

I see that in the gcode different keys used for filament length/weight/cost. This is the reason you only see printing time on the above screenshot. I will try to modify...

I've made some changes, properties from your gcode file detected: Will test it a little and then upload.

On Neptune 4 (I did not start print):

You do not need to modify ur printer firmware. You will need to add script into your Bamboo Studio (I hope you can do that, in OrcaSlicer it is on...

Using Bambu Studio for non-Bambu printer while owning more than 1 printer makes perfect sense. Ta. Could you try to setup the script in Bambu Studio with image_size option specified...

As per installation steps, it should be something like: ``` "C:\Path\Where\You\Put\Downloaded\thumbnail.exe" "--image_size=50x50"; ```

Sorry, I do not know what easyVmaf can do so unable to compare. > The reference and distorted videos need to be frame-synchronized FFMetrics is trying to do this. >...

Confirmed 10.3.0.5862