Transaction is not fully success

[tigermumu]

I copy this code and deployed it as your instruction. But transaction is not performed complete successfully, Tx information as this link : https://ropsten.etherscan.io/tx/0xdaf800d40de5a469f07f16f030a04c194f7aca099e7422876ea388580aed9aac

Why is it happened? Could you help me to make it clear ?

Thanks you.

[fifikobayashi]

This means the arbitrage logic has failed in between acquiring and repaying the flashloan. Could be anything ranging from what you used as the Sushiswap Router02 address to the ERC20 you're using in this trade, or flashamount was less than amountToTrade...erc

To keep things simple try a fresh deployment to ropsten, with the following parameters:

1. On deployment: _AAVELENDINGPOOL: 0x1c8756FD2B28e9426CDBDcC7E3c4d64fa9A54728 _UNISWAPV2ROUTER: 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D _SUSHISWAPV2ROUTER: 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D

2. Send 0.2 ETH to your contract

3. On execution: _flashAsset: 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE _flashAmount: 1000000000000000000 _daiTokenAddress: 0xf80A32A835F79D7787E8a8ee5721D0fEaFd78108 _amountToTrade: 1000000000000000000 _tokensOut: 1

I tried it out just then and it worked fine. https://ropsten.etherscan.io/tx/0x4c63d2230995782e006d3ca9dc9f011134c04a5c773387f8a603b8f23dd9b3a4

[tigermumu]

Yes, I redeployed a contract , repeat your process. It shows interesting result: 5 transactions , 3 are reverted, 2 are all success... https://ropsten.etherscan.io/address/0x002951299cbd9a373cc9f8e96661858031d332b6

I think contract of uniswap or sushi in ropsten net might be not working reliably

I have deployed a contract again. https://ropsten.etherscan.io/address/0x5c10db9cba048620c10c1bc224e8f476fd706bd7. It is worked normally at first and second transact. I found the new deployed contract could be worked completely twice. After that, it will shows reverted. May be it is effected by balance of contract ?

May be not.... I have been withdraw all balance in contract , and resend 0.2eth in this contract. But still not work.... Why it is just worked fine twice??

[StayFoolisj]

I had a transaction "Success" but 2 executions were reverted. I followed @fifikobayashi instructions above precisely. I'm not finding any hints in the transaction log on etherscan nor the remix logs. The contract still have plenty of ether left. Tried 2 times with same result:

https://ropsten.etherscan.io/tx/0x83d344a3f6ce8122fe2ab8d4cda2e4326c6a3fc1ba791f7f0b556cc16da697e6

https://ropsten.etherscan.io/tx/0x00182d3a84fb3968c346e2bd09c34984878c0e643bca7bf0ae584cdaa227a8fc

Mind having a look?