BB
BB copied to clipboard
fhorinek
Charging completed with 90% (fw262)
Dear all, when charging via original QC the screen shows only the charging animation without any further information like charge level in % (older fws did show more info on the charging screen). After some time it shows the notification "charging done".
When I start the vario mode the displayed charged level is 90%. When I keep it connected, this charge level does not move up further.
Why does it not complete the 100%?
Start charge level was 68%, charging time was around 1h. Fw 262 release
Interesting issue I found out:
Case 1: The Strato is in a switched-off state when I connect it to the supplied quick-charger. At 88% is reports "charging done" and stops charging (88% charged lvl I found out via turning on -> widget).
Case 2: The Strato is in a switched-on state, then I connect it to the supplied quick-charger. It charges through to 100%.
Thank you for the report The newer firmware does not report percentage when the battery monitoring circuit is not cycled (full charge, full discharge). The widget will display the wrong value anyway... That is a bug to fix! Try to fully discharge the device and then fully charge it.
