Autosrting of cutout curves sometimes gets ruined

[JensDyvik]

The problem seems to be in the "Fix curve seam" clusters inside the "Cutout component"

If the Fix curve seam clusters are overridden, the the sorted order is preserved. This would be great to fix, because sometimes the unnecessary jogging can significantly increase the duration of a job.

[JensDyvik]

It seems the override destroyed the inside/outside curve sorting. So not a good short term fix after all

[mikeFandA]

A possible solution could be to set the start point of the curve manually using a set parameter such as a cp operation based on the work plane origin. That should be something you could do in a custom component without affecting the others Burch if and ruining the curve order downstream.

On Thu, 6 Oct 2022 at 10:44, Jens Dyvik @.***> wrote:

It seems the override destroyed the inside/outside curve sorting. So not a good short term fix after all

— Reply to this email directly, view it on GitHub https://github.com/fellesverkstedet/Bark-beetle-parametric-toolpaths/issues/85#issuecomment-1270077699, or unsubscribe https://github.com/notifications/unsubscribe-auth/AGFQFYOOFRTJUPG7TRXJOETWB3JUPANCNFSM6AAAAAAQ6TWU7Q . You are receiving this because you are subscribed to this thread.Message ID: <fellesverkstedet/Bark-beetle-parametric-toolpaths/issues/85/1270077699@ github.com>

--

Michael Arnett

BArch MArch

Coordinador de Robotica y Diseño Digital

Universidad Autonoma de Chile

Sede Temuco

+56 45 2895298

Avda. Rudecindo Ortega 01302, Temuco