octo4a
octo4a copied to clipboard
feelfreelinux
Installation error | 1.2.4 exception when installing octoprint
💻 No bootstrap detected, proceeding with installation
💻 Arch: arm
💻 Downloading bootstrap 0.3.0 from https://github.com/feelfreelinux/android-linux-bootstrap/releases/download/0.3.0/bootstrap-armv7a.zip
💻 Request to https://objects.githubusercontent.com/github-production-release-asset-2e65be/352965812/2cd65898-00b6-4b5a-bd0f-7a036eff0c4f?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20230327%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20230327T191338Z&X-Amz-Expires=300&X-Amz-Signature=0f2feb07e941f71c4e5771de5790ba525f7b0170deea216b9a0097a1bcf351a2&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=352965812&response-content-disposition=attachment%3B%20filename%3Dbootstrap-armv7a.zip&response-content-type=application%2Foctet-stream returned status code 200
💻 Bootstrap extracted, setting it up...
💻 >ls
🐸 add-user.sh
🐸 fake_proc_stat
🐸 install-bootstrap.sh
🐸 ioctlHook.so
🐸 root
🐸 root-pre5
🐸 rootfs.tar.xz
🐸 run-bootstrap.sh
💻 >chmod -R 700 .
💻 >sh install-bootstrap.sh
🐸 Bad mode
🐸 WARNING: linker: ../root/bin/minitar: unused DT entry: type 0x6ffffef5 arg 0xaa4
🐸 WARNING: linker: ../root/bin/minitar: unused DT entry: type 0x6ffffffe arg 0xddc
🐸 WARNING: linker: ../root/bin/minitar: unused DT entry: type 0x6fffffff arg 0x2
🐸 bootstrap ready, run with run-bootstrap.sh
💻 >sh add-user.sh octoprint
💻 >cat /etc/motd
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 Welcome to Alpine!
🐸
🐸 The Alpine Wiki contains a large amount of how-to guides and general
🐸 information about administrating Alpine systems.
🐸 See https://wiki.alpinelinux.org/.
🐸
🐸 You can setup the system with the command: setup-alpine
🐸
🐸 You may change this message by editing /etc/motd.
🐸
💻 >env
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 EXTRA_BIND=-b /storage/emulated/0/Android/data/com.octo4a/files:/root -b /data/data/com.octo4a/files/serialpipe:/dev/ttyOcto4a -b /data/data/com.octo4a/files/bootstrap/ioctlHook.so:/home/octoprint/ioctlHook.so
🐸 USER=root
🐸 NVM_ROOT_DIR=/NVM
🐸 KNOX_STORAGE=/data/knox/ext_sdcard
🐸 EXTERNAL_STORAGE=/storage/emulated/legacy
🐸 LOOP_MOUNTPOINT=/mnt/obb
🐸 PROOT_L2S_DIR=/data/data/com.octo4a/files/bootstrap/bootstrap/.proot.meta
🐸 MARVELL_RW_DIR=/tmp/acat
🐸 SHLVL=1
🐸 HOME=/root
🐸 ANDROID_ASSETS=/system/app
🐸 BOOTCLASSPATH=/system/framework/core-libart.jar:/system/framework/conscrypt.jar:/system/framework/okhttp.jar:/system/framework/core-junit.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/telephony-common.jar:/system/framework/voip-common.jar:/system/framework/ims-common.jar:/system/framework/mms-common.jar:/system/framework/android.policy.jar:/system/framework/apache-xml.jar:/system/framework/sec_edm.jar:/system/framework/seccamera.jar:/system/framework/timakeystore.jar:/system/framework/fipstimakeystore.jar:/system/framework/commonimsinterface.jar:/system/framework/imsmanager.jar:/system/framework/secEmailBC.jar:/system/framework/secocsp.jar:/system/framework/knoxvpnuidtag.jar:/system/framework/sec_sdp_sdk.jar
🐸 _=./root/bin/proot
🐸 ANDROID_DATA=/data
🐸 PATH=/sbin:/usr/sbin:/bin:/usr/bin
🐸 ANDROID_ROOT=/system
🐸 SECONDARY_STORAGE=/storage/extSdCard
🐸 LANG='en_US.UTF-8'
🐸 ANDROID_SOCKET_zygote=9
🐸 EMULATED_STORAGE_TARGET=/storage/emulated
🐸 ASEC_MOUNTPOINT=/mnt/asec
🐸 PWD=/root
🐸 ANDROID_PROPERTY_WORKSPACE=8,0
🐸 SYSTEMSERVERCLASSPATH=/system/framework/services.jar:/system/framework/ethernet-service.jar:/system/framework/wifi-service.jar
🐸 ANDROID_STORAGE=/storage
🐸 PROOT_TMP_DIR=/data/data/com.octo4a/files/bootstrap/tmp
🐸 ANDROID_BOOTLOGO=1
🐸 EMULATED_STORAGE_SOURCE=/mnt/shell/emulated
💻 >ls /
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 bin
🐸 dev
🐸 etc
🐸 home
🐸 lib
🐸 media
🐸 mnt
🐸 opt
🐸 proc
🐸 root
🐸 run
🐸 sbin
🐸 srv
🐸 storage
🐸 sys
🐸 system
🐸 tmp
🐸 usr
🐸 var
🐸 vendor
💻 >apk add openssh-server curl bash unzip
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 fetch https://dl-cdn.alpinelinux.org/alpine/v3.17/main/armhf/APKINDEX.tar.gz
🐸 fetch https://dl-cdn.alpinelinux.org/alpine/v3.17/community/armhf/APKINDEX.tar.gz
🐸 (1/13) Installing ncurses-terminfo-base (6.3_p20221119-r0)
🐸 (2/13) Installing ncurses-libs (6.3_p20221119-r0)
🐸 (3/13) Installing readline (8.2.0-r0)
🐸 (4/13) Installing bash (5.2.15-r0)
🐸 Executing bash-5.2.15-r0.post-install
🐸 (5/13) Installing ca-certificates (20220614-r4)
🐸 (6/13) Installing brotli-libs (1.0.9-r9)
🐸 (7/13) Installing nghttp2-libs (1.51.0-r0)
🐸 (8/13) Installing libcurl (7.88.1-r1)
🐸 (9/13) Installing curl (7.88.1-r1)
🐸 (10/13) Installing openssh-keygen (9.1_p1-r2)
🐸 (11/13) Installing openssh-server-common (9.1_p1-r2)
🐸 (12/13) Installing openssh-server (9.1_p1-r2)
🐸 (13/13) Installing unzip (6.0-r13)
🐸 Executing busybox-1.35.0-r29.trigger
🐸 Executing ca-certificates-20220614-r4.trigger
🐸 OK: 15 MiB in 28 packages
💻 >echo "PermitRootLogin yes" >> /etc/ssh/sshd_config
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
💻 >ssh-keygen -A
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 ssh-keygen: generating new host keys: RSA ECDSA ED25519
💻 Installing p7zip...
💻 >apk add p7zip
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 ERROR: unable to select packages:
🐸 p7zip (no such package):
🐸 required by: world[p7zip]
💻 Failed to install p7zip from release repository, trying Alpine edge...
💻 This may be caused by the fact that p7zip is missing on armhf Alpine 3.17, see: https://gitlab.alpinelinux.org/alpine/aports/-/commits/master/main/p7zip/APKBUILD
💻 >apk add p7zip --repository=http://dl-cdn.alpinelinux.org/alpine/edge/main
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz
🐸 (1/3) Installing libgcc (12.2.1_git20220924-r9)
🐸 (2/3) Installing libstdc++ (12.2.1_git20220924-r9)
🐸 (3/3) Installing p7zip (17.05-r1)
🐸 Executing busybox-1.35.0-r29.trigger
🐸 OK: 26 MiB in 31 packages
💻 Bootstrap installed
💻 Downloading Octoprint from https://api.github.com/repos/OctoPrint/OctoPrint/zipball/1.8.7
💻 >curl -s https://raw.githubusercontent.com/feelfreelinux/octo4a/master/scripts/setup-octo4a.sh | bash -s
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 (1/99) Installing sdl2 (2.26.3-r0)
🐸 (2/99) Installing libxau (1.0.10-r0)
🐸 (3/99) Installing libmd (1.0.4-r0)
🐸 (4/99) Installing libbsd (0.11.7-r0)
🐸 (5/99) Installing libxdmcp (1.1.4-r0)
🐸 (6/99) Installing libxcb (1.15-r0)
🐸 (7/99) Installing libx11 (1.8.4-r0)
🐸 (8/99) Installing aom-libs (3.5.0-r0)
🐸 (9/99) Installing alsa-lib (1.2.8-r0)
🐸 (10/99) Installing libexpat (2.5.0-r0)
🐸 (11/99) Installing libbz2 (1.0.8-r4)
🐸 (12/99) Installing libpng (1.6.38-r0)
🐸 (13/99) Installing freetype (2.12.1-r0)
🐸 (14/99) Installing fontconfig (2.14.1-r0)
🐸 (15/99) Installing fribidi (1.0.12-r0)
🐸 (16/99) Installing libffi (3.4.4-r0)
🐸 (17/99) Installing libintl (0.21.1-r1)
🐸 (18/99) Installing libblkid (2.38.1-r1)
🐸 (19/99) Installing libmount (2.38.1-r1)
🐸 (20/99) Installing pcre2 (10.42-r0)
🐸 (21/99) Installing glib (2.74.6-r0)
🐸 (22/99) Installing graphite2 (1.3.14-r2)
🐸 (23/99) Installing harfbuzz (5.3.1-r1)
🐸 (24/99) Installing libass (0.16.0-r1)
🐸 (25/99) Installing libdav1d (1.0.0-r2)
🐸 (26/99) Installing libdrm (2.4.114-r0)
🐸 (27/99) Installing gmp (6.2.1-r2)
🐸 (28/99) Installing nettle (3.8.1-r0)
🐸 (29/99) Installing p11-kit (0.24.1-r1)
🐸 (30/99) Installing libtasn1 (4.19.0-r0)
🐸 (31/99) Installing libunistring (1.1-r0)
🐸 (32/99) Installing gnutls (3.7.8-r3)
🐸 (33/99) Installing lame (3.100-r2)
🐸 (34/99) Installing opus (1.3.1-r1)
🐸 (35/99) Installing libasyncns (0.8-r1)
🐸 (36/99) Installing dbus-libs (1.14.4-r0)
🐸 (37/99) Installing libltdl (2.4.7-r1)
🐸 (38/99) Installing orc (0.4.33-r0)
🐸 (39/99) Installing libogg (1.3.5-r2)
🐸 (40/99) Installing flac-libs (1.4.2-r0)
🐸 (41/99) Installing libvorbis (1.3.7-r0)
🐸 (42/99) Installing libsndfile (1.1.0-r2)
🐸 (43/99) Installing libgomp (12.2.1_git20220924-r4)
🐸 (44/99) Installing soxr (0.1.3-r3)
🐸 (45/99) Installing speexdsp (1.2.1-r0)
🐸 (46/99) Installing tdb-libs (1.4.7-r0)
🐸 (47/99) Installing libpulse (16.1-r6)
🐸 (48/99) Installing cjson (1.7.15-r3)
🐸 (49/99) Installing mbedtls (2.28.2-r0)
🐸 (50/99) Installing librist (0.2.7-r0)
🐸 (51/99) Installing libsrt (1.5.1-r0)
🐸 (52/99) Installing libssh (0.10.4-r0)
🐸 (53/99) Installing libtheora (1.1.1-r16)
🐸 (54/99) Installing libjpeg-turbo (2.1.4-r0)
🐸 (55/99) Installing v4l-utils-libs (1.22.1-r2)
🐸 (56/99) Installing libxext (1.3.5-r0)
🐸 (57/99) Installing libxfixes (6.0.0-r0)
🐸 (58/99) Installing wayland-libs-client (1.21.0-r1)
🐸 (59/99) Installing libva (2.16.0-r0)
🐸 (60/99) Installing libvdpau (1.5-r0)
🐸 (61/99) Installing vidstab (1.1.0-r2)
🐸 (62/99) Installing libvpx (1.12.0-r1)
🐸 (63/99) Installing libwebp (1.2.4-r1)
🐸 (64/99) Installing x264-libs (0.164_git20220602-r0)
🐸 (65/99) Installing numactl (2.0.16-r1)
🐸 (66/99) Installing x265-libs (3.5-r3)
🐸 (67/99) Installing xvidcore (1.3.7-r1)
🐸 (68/99) Installing libsodium (1.0.18-r2)
🐸 (69/99) Installing libzmq (4.3.4-r1)
🐸 (70/99) Installing ffmpeg-libs (5.1.3-r0)
🐸 (71/99) Installing ffmpeg (5.1.3-r0)
🐸 (72/99) Installing py3-netifaces (0.11.0-r1)
🐸 (73/99) Installing py3-olefile (0.46-r6)
🐸 (74/99) Installing gdbm (1.23-r0)
🐸 (75/99) Installing xz-libs (5.2.9-r0)
🐸 (76/99) Installing mpdecimal (2.5.1-r1)
🐸 (77/99) Installing sqlite-libs (3.40.1-r0)
🐸 (78/99) Installing python3 (3.10.10-r0)
🐸 (79/99) Installing libimagequant (4.0.4-r0)
🐸 (80/99) Installing lcms2 (2.14-r0)
🐸 (81/99) Installing openjpeg (2.5.0-r0)
🐸 (82/99) Installing zstd-libs (1.5.2-r9)
🐸 (83/99) Installing tiff (4.4.0-r3)
🐸 (84/99) Installing py3-pillow (9.3.0-r0)
🐸 (85/99) Installing py3-six (1.16.0-r3)
🐸 (86/99) Installing py3-retrying (1.3.3-r3)
🐸 (87/99) Installing py3-parsing (3.0.9-r0)
🐸 (88/99) Installing py3-packaging (21.3-r2)
🐸 (89/99) Installing py3-setuptools (65.6.0-r0)
🐸 (90/99) Installing py3-pip (22.3.1-r1)
🐸 (91/99) Installing py3-psutil (5.9.4-r0)
🐸 (92/99) Installing py3-regex (2022.10.31-r0)
🐸 (93/99) Installing yaml (0.2.5-r0)
🐸 (94/99) Installing py3-yaml (6.0-r0)
🐸 (95/99) Installing libuv (1.44.2-r0)
🐸 (96/99) Installing libwebsockets (4.3.2-r1)
🐸 (97/99) Installing libwebsockets-evlib_uv (4.3.2-r1)
🐸 (98/99) Installing json-c (0.16-r2)
🐸 (99/99) Installing ttyd (1.7.2-r0)
🐸 Executing busybox-1.35.0-r29.trigger
🐸 OK: 173 MiB in 130 packages
🐸 Collecting packaging
🐸 Downloading packaging-23.0-py3-none-any.whl (42 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 42.7/42.7 kB 392.3 kB/s eta 0:00:00
🐸 Installing collected packages: packaging
🐸 Successfully installed packaging-23.0
🐸 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
🐸 Collecting https://github.com/feelfreelinux/octo4a-argon2-mock/archive/main.zip
🐸 Downloading https://github.com/feelfreelinux/octo4a-argon2-mock/archive/main.zip
🐸 - 6.3 kB 1.2 MB/s 0:00:00
🐸 Installing build dependencies: started
🐸 Installing build dependencies: finished with status 'done'
🐸 Getting requirements to build wheel: started
🐸 Getting requirements to build wheel: finished with status 'done'
🐸 Preparing metadata (pyproject.toml): started
🐸 Preparing metadata (pyproject.toml): finished with status 'done'
🐸 Building wheels for collected packages: argon2-cffi
🐸 Building wheel for argon2-cffi (pyproject.toml): started
🐸 Building wheel for argon2-cffi (pyproject.toml): finished with status 'done'
🐸 Created wheel for argon2-cffi: filename=argon2_cffi-21.3.0-py3-none-any.whl size=1606 sha256=c93ba382c8f724afaf5f24a61bb4423cebf80edf75e7b25dcc4c9b2c323bdd0b
🐸 Stored in directory: /tmp/pip-ephem-wheel-cache-s7cyjkyf/wheels/6b/30/6b/6fcc594d71f28bbcbd8aae83b53e1ca59e203102a84d4e1121
🐸 Successfully built argon2-cffi
🐸 Installing collected packages: argon2-cffi
🐸 Successfully installed argon2-cffi-21.3.0
🐸 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
💻 >curl -o octoprint.zip -L https://api.github.com/repos/OctoPrint/OctoPrint/zipball/1.8.7
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 % Total % Received % Xferd Average Speed Time Time Time Current
🐸 Dload Upload Total Spent Left Speed
🐸
🐸 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
🐸 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
🐸 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
🐸
🐸 100 11630 0 11630 0 0 9329 0 --:--:-- 0:00:01 --:--:-- 9329
🐸 100 2085k 0 2085k 0 0 1027k 0 --:--:-- 0:00:02 --:--:-- 2645k
🐸 100 5408k 0 5408k 0 0 1776k 0 --:--:-- 0:00:03 --:--:-- 3001k
🐸 100 6452k 0 6452k 0 0 1962k 0 --:--:-- 0:00:03 --:--:-- 3155k
💻 >echo PWD IS $PWD, and running as $USER, patch is $PATH, Unzip is at $(which unzip) && ls -lah $(which unzip)
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 PWD IS /root, and running as root, patch is /sbin:/usr/sbin:/bin:/usr/bin, Unzip is at
🐸 total 6M
🐸 drwxrwx--- 4 root 1028 4.0K Mar 27 19:15 .
🐸 drwx------ 23 root root 4.0K Mar 27 19:16 ..
🐸 drwxrwx--- 3 root 1028 4.0K Mar 27 19:15 .cache
🐸 -rwxrwx--- 1 root 1028 10 Mar 27 19:14 .octoCredentials
🐸 drwxrwx--- 3 root 1028 4.0K Mar 27 19:14 extensions
🐸 -rwxrwx--- 1 root 1028 6.3M Mar 27 19:16 octoprint.zip
💻 >ls -lah
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 total 6M
🐸 drwxrwx--- 4 root 1028 4.0K Mar 27 19:15 .
🐸 drwx------ 23 root root 4.0K Mar 27 19:16 ..
🐸 drwxrwx--- 3 root 1028 4.0K Mar 27 19:15 .cache
🐸 -rwxrwx--- 1 root 1028 10 Mar 27 19:14 .octoCredentials
🐸 drwxrwx--- 3 root 1028 4.0K Mar 27 19:14 extensions
🐸 -rwxrwx--- 1 root 1028 6.3M Mar 27 19:16 octoprint.zip
💻 >7z x -y octoprint.zip
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸
🐸 7-Zip [32] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
🐸 p7zip Version 17.04 (locale='en_US.UTF-8',Utf16=on,HugeFiles=on,32 bits,4 CPUs LE)
🐸
🐸 Scanning the drive for archives:
🐸 1 file, 6607230 bytes (6453 KiB)
🐸
🐸 Extracting archive: octoprint.zip
🐸 --
🐸 Path = octoprint.zip
🐸 Type = zip
🐸 Physical Size = 6607230
🐸 Comment = 8e4c1f5246c4245b839ccdcdabf2beee671b08d7
🐸
🐸 Everything is Ok
🐸
🐸 Folders: 219
🐸 Files: 881
🐸 Size: 20391229
🐸 Compressed: 6607230
💻 >cd Octo* && pip3 install .
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 Processing /root/OctoPrint-OctoPrint-8e4c1f5
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting OctoPrint-FileCheck>=2021.2.23
🐸 Downloading OctoPrint_FileCheck-2021.2.23-py2.py3-none-any.whl (19 kB)
🐸 Collecting OctoPrint-FirmwareCheck>=2021.10.11
🐸 Downloading OctoPrint_FirmwareCheck-2021.10.11-py2.py3-none-any.whl (33 kB)
🐸 Collecting OctoPrint-PiSupport>=2022.6.13
🐸 Downloading OctoPrint_PiSupport-2022.6.13-py2.py3-none-any.whl (33 kB)
🐸 Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint==1.8.7) (21.3.0)
🐸 Collecting cachelib<0.3,>=0.2
🐸 Downloading cachelib-0.2.0-py3-none-any.whl (12 kB)
🐸 Collecting Click<9,>=8.0.3
🐸 Downloading click-8.1.3-py3-none-any.whl (96 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 96.6/96.6 kB 1.4 MB/s eta 0:00:00
🐸 Collecting colorlog<7,>=6
🐸 Downloading colorlog-6.7.0-py2.py3-none-any.whl (11 kB)
🐸 Collecting emoji<2,>=1.4.2
🐸 Downloading emoji-1.7.0.tar.gz (175 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 175.4/175.4 kB 1.6 MB/s eta 0:00:00
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting feedparser<7,>=6.0.8
🐸 Downloading feedparser-6.0.10-py3-none-any.whl (81 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 81.1/81.1 kB 1.4 MB/s eta 0:00:00
🐸 Collecting filetype<2,>=1.0.7
🐸 Downloading filetype-1.2.0-py2.py3-none-any.whl (19 kB)
🐸 Collecting Flask-Assets<3,>=2.0
🐸 Downloading Flask_Assets-2.0-py3-none-any.whl (8.5 kB)
🐸 Collecting Flask-Babel<3,>=2.0
🐸 Downloading Flask_Babel-2.0.0-py3-none-any.whl (9.3 kB)
🐸 Collecting Flask-Login<0.6,>=0.5
🐸 Downloading Flask_Login-0.5.0-py2.py3-none-any.whl (16 kB)
🐸 Collecting Flask-Limiter<3,>=2.6
🐸 Downloading Flask_Limiter-2.9.2-py3-none-any.whl (27 kB)
🐸 Collecting flask<2.2,>=2.1
🐸 Downloading Flask-2.1.3-py3-none-any.whl (95 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 95.6/95.6 kB 720.3 kB/s eta 0:00:00
🐸 Collecting frozendict<3,>=2.0
🐸 Downloading frozendict-2.3.6.tar.gz (35 kB)
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting future<1,>=0.18.2
🐸 Downloading future-0.18.3.tar.gz (840 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 840.9/840.9 kB 3.5 MB/s eta 0:00:00
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting markdown<4,>=3.2.2
🐸 Downloading Markdown-3.4.3-py3-none-any.whl (93 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.9/93.9 kB 1.7 MB/s eta 0:00:00
🐸 Collecting netaddr<0.9,>=0.8
🐸 Downloading netaddr-0.8.0-py2.py3-none-any.whl (1.9 MB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.9/1.9 MB 2.2 MB/s eta 0:00:00
🐸 Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint==1.8.7) (0.11.0)
🐸 Collecting passlib<2,>=1.7.4
🐸 Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 525.6/525.6 kB 3.3 MB/s eta 0:00:00
🐸 Collecting pathvalidate<3,>=2.4.1
🐸 Downloading pathvalidate-2.5.2-py3-none-any.whl (20 kB)
🐸 Collecting pkginfo<2,>=1.7.1
🐸 Downloading pkginfo-1.9.6-py3-none-any.whl (30 kB)
🐸 Requirement already satisfied: psutil<6,>=5.8 in /usr/lib/python3.10/site-packages (from OctoPrint==1.8.7) (5.9.4)
🐸 Collecting pylru<2,>=1.2
🐸 Downloading pylru-1.2.1-py3-none-any.whl (16 kB)
🐸 Collecting pyserial<4,>=3.4
🐸 Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 1.7 MB/s eta 0:00:00
🐸 Collecting PyYAML<6,>=5.4.1
🐸 Downloading PyYAML-5.4.1.tar.gz (175 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 175.1/175.1 kB 2.5 MB/s eta 0:00:00
🐸 Installing build dependencies: started
🐸 Installing build dependencies: finished with status 'done'
🐸 Getting requirements to build wheel: started
🐸 Getting requirements to build wheel: finished with status 'done'
🐸 Preparing metadata (pyproject.toml): started
🐸 Preparing metadata (pyproject.toml): finished with status 'done'
🐸 Collecting requests<3,>=2.26.0
🐸 Downloading requests-2.28.2-py3-none-any.whl (62 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 1.1 MB/s eta 0:00:00
🐸 Collecting sarge==0.1.6
🐸 Downloading sarge-0.1.6.tar.gz (26 kB)
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting semantic_version<3,>=2.8.5
🐸 Downloading semantic_version-2.10.0-py2.py3-none-any.whl (15 kB)
🐸 Collecting sentry-sdk<2,>=1.5.7
🐸 Downloading sentry_sdk-1.17.0-py2.py3-none-any.whl (189 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 189.1/189.1 kB 1.6 MB/s eta 0:00:00
🐸 Collecting tornado<7,>=6.0.4
🐸 Downloading tornado-6.2.tar.gz (504 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 504.8/504.8 kB 2.0 MB/s eta 0:00:00
🐸 Installing build dependencies: started
🐸 Installing build dependencies: finished with status 'done'
🐸 Getting requirements to build wheel: started
🐸 Getting requirements to build wheel: finished with status 'done'
🐸 Preparing metadata (pyproject.toml): started
🐸 Preparing metadata (pyproject.toml): finished with status 'done'
🐸 Collecting watchdog<2,>=1
🐸 Downloading watchdog-1.0.2.tar.gz (98 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.5/98.5 kB 1.6 MB/s eta 0:00:00
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting websocket-client<2,>=1.2.1
🐸 Downloading websocket_client-1.5.1-py3-none-any.whl (55 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 55.9/55.9 kB 720.9 kB/s eta 0:00:00
🐸 Collecting werkzeug<2.1,>=2.0
🐸 Downloading Werkzeug-2.0.3-py3-none-any.whl (289 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 289.2/289.2 kB 1.9 MB/s eta 0:00:00
🐸 Collecting wrapt<1.15,>=1.14
🐸 Downloading wrapt-1.14.1.tar.gz (50 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 50.9/50.9 kB 638.2 kB/s eta 0:00:00
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting zeroconf<0.34,>=0.33
🐸 Downloading zeroconf-0.33.4-py3-none-any.whl (89 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 89.8/89.8 kB 1.5 MB/s eta 0:00:00
🐸 Collecting zipstream-ng<2.0.0,>=1.3.4
🐸 Downloading zipstream_ng-1.4.0-py3-none-any.whl (21 kB)
🐸 Collecting blinker<2,>=1.4
🐸 Downloading blinker-1.5-py2.py3-none-any.whl (12 kB)
🐸 Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from OctoPrint==1.8.7) (2022.10.31)
🐸 Collecting unidecode
🐸 Downloading Unidecode-1.3.6-py3-none-any.whl (235 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 235.9/235.9 kB 2.2 MB/s eta 0:00:00
🐸 Collecting sgmllib3k
🐸 Downloading sgmllib3k-1.0.0.tar.gz (5.8 kB)
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting Jinja2>=3.0
🐸 Downloading Jinja2-3.1.2-py3-none-any.whl (133 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.1/133.1 kB 1.8 MB/s eta 0:00:00
🐸 Collecting itsdangerous>=2.0
🐸 Downloading itsdangerous-2.1.2-py3-none-any.whl (15 kB)
🐸 Collecting webassets>=2.0
🐸 Downloading webassets-2.0-py3-none-any.whl (142 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 142.9/142.9 kB 2.3 MB/s eta 0:00:00
🐸 Collecting Babel>=2.3
🐸 Downloading Babel-2.12.1-py3-none-any.whl (10.1 MB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.1/10.1 MB 2.8 MB/s eta 0:00:00
🐸 Collecting pytz
🐸 Downloading pytz-2023.2-py2.py3-none-any.whl (502 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 502.1/502.1 kB 3.7 MB/s eta 0:00:00
🐸 Collecting ordered-set<5,>4
🐸 Downloading ordered_set-4.1.0-py3-none-any.whl (7.6 kB)
🐸 Collecting typing-extensions>=4
🐸 Downloading typing_extensions-4.5.0-py3-none-any.whl (27 kB)
🐸 Collecting limits>=2.8
🐸 Downloading limits-3.3.1-py3-none-any.whl (43 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.8/43.8 kB 599.7 kB/s eta 0:00:00
🐸 Collecting rich<13,>=12
🐸 Downloading rich-12.6.0-py3-none-any.whl (237 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 237.5/237.5 kB 2.5 MB/s eta 0:00:00
🐸 Collecting idna<4,>=2.5
🐸 Downloading idna-3.4-py3-none-any.whl (61 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 1.3 MB/s eta 0:00:00
🐸 Collecting urllib3<1.27,>=1.21.1
🐸 Downloading urllib3-1.26.15-py2.py3-none-any.whl (140 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.9/140.9 kB 2.4 MB/s eta 0:00:00
🐸 Collecting certifi>=2017.4.17
🐸 Downloading certifi-2022.12.7-py3-none-any.whl (155 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.3/155.3 kB 1.6 MB/s eta 0:00:00
🐸 Collecting charset-normalizer<4,>=2
🐸 Downloading charset_normalizer-3.1.0-py3-none-any.whl (46 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.2/46.2 kB 977.8 kB/s eta 0:00:00
🐸 Collecting ifaddr>=0.1.7
🐸 Downloading ifaddr-0.2.0-py3-none-any.whl (12 kB)
🐸 Collecting MarkupSafe>=2.0
🐸 Downloading MarkupSafe-2.1.2.tar.gz (19 kB)
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Requirement already satisfied: setuptools in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint==1.8.7) (65.6.0)
🐸 Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint==1.8.7) (23.0)
🐸 Collecting deprecated>=1.2
🐸 Downloading Deprecated-1.2.13-py2.py3-none-any.whl (9.6 kB)
🐸 Collecting importlib-resources>=1.3
🐸 Downloading importlib_resources-5.12.0-py3-none-any.whl (36 kB)
🐸 Collecting commonmark<0.10.0,>=0.9.0
🐸 Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 807.2 kB/s eta 0:00:00
🐸 Collecting pygments<3.0.0,>=2.6.0
🐸 Downloading Pygments-2.14.0-py3-none-any.whl (1.1 MB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 2.9 MB/s eta 0:00:00
🐸 Building wheels for collected packages: PyYAML, tornado
🐸 Building wheel for PyYAML (pyproject.toml): started
🐸 Building wheel for PyYAML (pyproject.toml): finished with status 'done'
🐸 WARNING: Building wheel for PyYAML failed: [Errno 1] Operation not permitted
🐸 Building wheel for tornado (pyproject.toml): started
🐸 Building wheel for tornado (pyproject.toml): finished with status 'done'
🐸 WARNING: Building wheel for tornado failed: [Errno 1] Operation not permitted
🐸 Failed to build PyYAML tornado
🐸 ERROR: Could not build wheels for PyYAML, tornado, which is required to install pyproject.toml-based projects
💻 An exception has occurred at:
java.lang.RuntimeException: Process exited with error code 1. [WARNING: linker: ./root/bin/proot: unused DT entr
at com.octo4a.utils.ProcessUtilsKt.waitAndPrintOutput(ProcessUtils.kt:38)
at com.octo4a.utils.ProcessUtilsKt.waitAndPrintOutput$default(ProcessUtils.kt:12)
at com.octo4a.repository.OctoPrintHandlerRepositoryImpl$beginInstallation$2.invokeSuspend(OctoPrintHandlerRepository.kt:164)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith(ContinuationImpl.kt:33)
at kotlinx.coroutines.UndispatchedCoroutine.afterResume(Builders.common.kt:265)
at kotlinx.coroutines.AbstractCoroutine.resumeWith(AbstractCoroutine.kt:113)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith(ContinuationImpl.kt:46)
at io.ktor.util.pipeline.SuspendFunctionGun.resumeRootWith(SuspendFunctionGun.kt:191)
at io.ktor.util.pipeline.SuspendFunctionGun.loop(SuspendFunctionGun.kt:147)
at io.ktor.util.pipeline.SuspendFunctionGun.access$loop(SuspendFunctionGun.kt:15)
at io.ktor.util.pipeline.SuspendFunctionGun$continuation$1.resumeWith(SuspendFunctionGun.kt:93)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith(ContinuationImpl.kt:46)
at io.ktor.util.pipeline.SuspendFunctionGun.resumeRootWith(SuspendFunctionGun.kt:191)
at io.ktor.util.pipeline.SuspendFunctionGun.loop(SuspendFunctionGun.kt:147)
at io.ktor.util.pipeline.SuspendFunctionGun.access$loop(SuspendFunctionGun.kt:15)
at io.ktor.util.pipeline.SuspendFunctionGun$continuation$1.resumeWith(SuspendFunctionGun.kt:93)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith(ContinuationImpl.kt:46)
at kotlinx.coroutines.DispatchedTask.run(DispatchedTask.kt:106)
at kotlinx.coroutines.scheduling.CoroutineScheduler.runSafely(CoroutineScheduler.kt:571)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.executeTask(CoroutineScheduler.kt:750)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.runWorker(CoroutineScheduler.kt:678)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.run(CoroutineScheduler.kt:665)
Exception:
java.lang.RuntimeException: Process exited with error code 1. [WARNING: linker: ./root/bin/proot: unused DT entr
💻 No bootstrap detected, proceeding with installation
💻 Arch: arm
💻 Downloading bootstrap 0.3.0 from https://github.com/feelfreelinux/android-linux-bootstrap/releases/download/0.3.0/bootstrap-armv7a.zip
💻 Request to https://objects.githubusercontent.com/github-production-release-asset-2e65be/352965812/2cd65898-00b6-4b5a-bd0f-7a036eff0c4f?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20230327%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20230327T191338Z&X-Amz-Expires=300&X-Amz-Signature=0f2feb07e941f71c4e5771de5790ba525f7b0170deea216b9a0097a1bcf351a2&X-Amz-SignedHeaders=host&actor_id=0&key_id=0&repo_id=352965812&response-content-disposition=attachment%3B%20filename%3Dbootstrap-armv7a.zip&response-content-type=application%2Foctet-stream returned status code 200
💻 Bootstrap extracted, setting it up...
💻 >ls
🐸 add-user.sh
🐸 fake_proc_stat
🐸 install-bootstrap.sh
🐸 ioctlHook.so
🐸 root
🐸 root-pre5
🐸 rootfs.tar.xz
🐸 run-bootstrap.sh
💻 >chmod -R 700 .
💻 >sh install-bootstrap.sh
🐸 Bad mode
🐸 WARNING: linker: ../root/bin/minitar: unused DT entry: type 0x6ffffef5 arg 0xaa4
🐸 WARNING: linker: ../root/bin/minitar: unused DT entry: type 0x6ffffffe arg 0xddc
🐸 WARNING: linker: ../root/bin/minitar: unused DT entry: type 0x6fffffff arg 0x2
🐸 bootstrap ready, run with run-bootstrap.sh
💻 >sh add-user.sh octoprint
💻 >cat /etc/motd
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 Welcome to Alpine!
🐸
🐸 The Alpine Wiki contains a large amount of how-to guides and general
🐸 information about administrating Alpine systems.
🐸 See https://wiki.alpinelinux.org/.
🐸
🐸 You can setup the system with the command: setup-alpine
🐸
🐸 You may change this message by editing /etc/motd.
🐸
💻 >env
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 EXTRA_BIND=-b /storage/emulated/0/Android/data/com.octo4a/files:/root -b /data/data/com.octo4a/files/serialpipe:/dev/ttyOcto4a -b /data/data/com.octo4a/files/bootstrap/ioctlHook.so:/home/octoprint/ioctlHook.so
🐸 USER=root
🐸 NVM_ROOT_DIR=/NVM
🐸 KNOX_STORAGE=/data/knox/ext_sdcard
🐸 EXTERNAL_STORAGE=/storage/emulated/legacy
🐸 LOOP_MOUNTPOINT=/mnt/obb
🐸 PROOT_L2S_DIR=/data/data/com.octo4a/files/bootstrap/bootstrap/.proot.meta
🐸 MARVELL_RW_DIR=/tmp/acat
🐸 SHLVL=1
🐸 HOME=/root
🐸 ANDROID_ASSETS=/system/app
🐸 BOOTCLASSPATH=/system/framework/core-libart.jar:/system/framework/conscrypt.jar:/system/framework/okhttp.jar:/system/framework/core-junit.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/telephony-common.jar:/system/framework/voip-common.jar:/system/framework/ims-common.jar:/system/framework/mms-common.jar:/system/framework/android.policy.jar:/system/framework/apache-xml.jar:/system/framework/sec_edm.jar:/system/framework/seccamera.jar:/system/framework/timakeystore.jar:/system/framework/fipstimakeystore.jar:/system/framework/commonimsinterface.jar:/system/framework/imsmanager.jar:/system/framework/secEmailBC.jar:/system/framework/secocsp.jar:/system/framework/knoxvpnuidtag.jar:/system/framework/sec_sdp_sdk.jar
🐸 _=./root/bin/proot
🐸 ANDROID_DATA=/data
🐸 PATH=/sbin:/usr/sbin:/bin:/usr/bin
🐸 ANDROID_ROOT=/system
🐸 SECONDARY_STORAGE=/storage/extSdCard
🐸 LANG='en_US.UTF-8'
🐸 ANDROID_SOCKET_zygote=9
🐸 EMULATED_STORAGE_TARGET=/storage/emulated
🐸 ASEC_MOUNTPOINT=/mnt/asec
🐸 PWD=/root
🐸 ANDROID_PROPERTY_WORKSPACE=8,0
🐸 SYSTEMSERVERCLASSPATH=/system/framework/services.jar:/system/framework/ethernet-service.jar:/system/framework/wifi-service.jar
🐸 ANDROID_STORAGE=/storage
🐸 PROOT_TMP_DIR=/data/data/com.octo4a/files/bootstrap/tmp
🐸 ANDROID_BOOTLOGO=1
🐸 EMULATED_STORAGE_SOURCE=/mnt/shell/emulated
💻 >ls /
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 bin
🐸 dev
🐸 etc
🐸 home
🐸 lib
🐸 media
🐸 mnt
🐸 opt
🐸 proc
🐸 root
🐸 run
🐸 sbin
🐸 srv
🐸 storage
🐸 sys
🐸 system
🐸 tmp
🐸 usr
🐸 var
🐸 vendor
💻 >apk add openssh-server curl bash unzip
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 fetch https://dl-cdn.alpinelinux.org/alpine/v3.17/main/armhf/APKINDEX.tar.gz
🐸 fetch https://dl-cdn.alpinelinux.org/alpine/v3.17/community/armhf/APKINDEX.tar.gz
🐸 (1/13) Installing ncurses-terminfo-base (6.3_p20221119-r0)
🐸 (2/13) Installing ncurses-libs (6.3_p20221119-r0)
🐸 (3/13) Installing readline (8.2.0-r0)
🐸 (4/13) Installing bash (5.2.15-r0)
🐸 Executing bash-5.2.15-r0.post-install
🐸 (5/13) Installing ca-certificates (20220614-r4)
🐸 (6/13) Installing brotli-libs (1.0.9-r9)
🐸 (7/13) Installing nghttp2-libs (1.51.0-r0)
🐸 (8/13) Installing libcurl (7.88.1-r1)
🐸 (9/13) Installing curl (7.88.1-r1)
🐸 (10/13) Installing openssh-keygen (9.1_p1-r2)
🐸 (11/13) Installing openssh-server-common (9.1_p1-r2)
🐸 (12/13) Installing openssh-server (9.1_p1-r2)
🐸 (13/13) Installing unzip (6.0-r13)
🐸 Executing busybox-1.35.0-r29.trigger
🐸 Executing ca-certificates-20220614-r4.trigger
🐸 OK: 15 MiB in 28 packages
💻 >echo "PermitRootLogin yes" >> /etc/ssh/sshd_config
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
💻 >ssh-keygen -A
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 ssh-keygen: generating new host keys: RSA ECDSA ED25519
💻 Installing p7zip...
💻 >apk add p7zip
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 ERROR: unable to select packages:
🐸 p7zip (no such package):
🐸 required by: world[p7zip]
💻 Failed to install p7zip from release repository, trying Alpine edge...
💻 This may be caused by the fact that p7zip is missing on armhf Alpine 3.17, see: https://gitlab.alpinelinux.org/alpine/aports/-/commits/master/main/p7zip/APKBUILD
💻 >apk add p7zip --repository=http://dl-cdn.alpinelinux.org/alpine/edge/main
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz
🐸 (1/3) Installing libgcc (12.2.1_git20220924-r9)
🐸 (2/3) Installing libstdc++ (12.2.1_git20220924-r9)
🐸 (3/3) Installing p7zip (17.05-r1)
🐸 Executing busybox-1.35.0-r29.trigger
🐸 OK: 26 MiB in 31 packages
💻 Bootstrap installed
💻 Downloading Octoprint from https://api.github.com/repos/OctoPrint/OctoPrint/zipball/1.8.7
💻 >curl -s https://raw.githubusercontent.com/feelfreelinux/octo4a/master/scripts/setup-octo4a.sh | bash -s
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 (1/99) Installing sdl2 (2.26.3-r0)
🐸 (2/99) Installing libxau (1.0.10-r0)
🐸 (3/99) Installing libmd (1.0.4-r0)
🐸 (4/99) Installing libbsd (0.11.7-r0)
🐸 (5/99) Installing libxdmcp (1.1.4-r0)
🐸 (6/99) Installing libxcb (1.15-r0)
🐸 (7/99) Installing libx11 (1.8.4-r0)
🐸 (8/99) Installing aom-libs (3.5.0-r0)
🐸 (9/99) Installing alsa-lib (1.2.8-r0)
🐸 (10/99) Installing libexpat (2.5.0-r0)
🐸 (11/99) Installing libbz2 (1.0.8-r4)
🐸 (12/99) Installing libpng (1.6.38-r0)
🐸 (13/99) Installing freetype (2.12.1-r0)
🐸 (14/99) Installing fontconfig (2.14.1-r0)
🐸 (15/99) Installing fribidi (1.0.12-r0)
🐸 (16/99) Installing libffi (3.4.4-r0)
🐸 (17/99) Installing libintl (0.21.1-r1)
🐸 (18/99) Installing libblkid (2.38.1-r1)
🐸 (19/99) Installing libmount (2.38.1-r1)
🐸 (20/99) Installing pcre2 (10.42-r0)
🐸 (21/99) Installing glib (2.74.6-r0)
🐸 (22/99) Installing graphite2 (1.3.14-r2)
🐸 (23/99) Installing harfbuzz (5.3.1-r1)
🐸 (24/99) Installing libass (0.16.0-r1)
🐸 (25/99) Installing libdav1d (1.0.0-r2)
🐸 (26/99) Installing libdrm (2.4.114-r0)
🐸 (27/99) Installing gmp (6.2.1-r2)
🐸 (28/99) Installing nettle (3.8.1-r0)
🐸 (29/99) Installing p11-kit (0.24.1-r1)
🐸 (30/99) Installing libtasn1 (4.19.0-r0)
🐸 (31/99) Installing libunistring (1.1-r0)
🐸 (32/99) Installing gnutls (3.7.8-r3)
🐸 (33/99) Installing lame (3.100-r2)
🐸 (34/99) Installing opus (1.3.1-r1)
🐸 (35/99) Installing libasyncns (0.8-r1)
🐸 (36/99) Installing dbus-libs (1.14.4-r0)
🐸 (37/99) Installing libltdl (2.4.7-r1)
🐸 (38/99) Installing orc (0.4.33-r0)
🐸 (39/99) Installing libogg (1.3.5-r2)
🐸 (40/99) Installing flac-libs (1.4.2-r0)
🐸 (41/99) Installing libvorbis (1.3.7-r0)
🐸 (42/99) Installing libsndfile (1.1.0-r2)
🐸 (43/99) Installing libgomp (12.2.1_git20220924-r4)
🐸 (44/99) Installing soxr (0.1.3-r3)
🐸 (45/99) Installing speexdsp (1.2.1-r0)
🐸 (46/99) Installing tdb-libs (1.4.7-r0)
🐸 (47/99) Installing libpulse (16.1-r6)
🐸 (48/99) Installing cjson (1.7.15-r3)
🐸 (49/99) Installing mbedtls (2.28.2-r0)
🐸 (50/99) Installing librist (0.2.7-r0)
🐸 (51/99) Installing libsrt (1.5.1-r0)
🐸 (52/99) Installing libssh (0.10.4-r0)
🐸 (53/99) Installing libtheora (1.1.1-r16)
🐸 (54/99) Installing libjpeg-turbo (2.1.4-r0)
🐸 (55/99) Installing v4l-utils-libs (1.22.1-r2)
🐸 (56/99) Installing libxext (1.3.5-r0)
🐸 (57/99) Installing libxfixes (6.0.0-r0)
🐸 (58/99) Installing wayland-libs-client (1.21.0-r1)
🐸 (59/99) Installing libva (2.16.0-r0)
🐸 (60/99) Installing libvdpau (1.5-r0)
🐸 (61/99) Installing vidstab (1.1.0-r2)
🐸 (62/99) Installing libvpx (1.12.0-r1)
🐸 (63/99) Installing libwebp (1.2.4-r1)
🐸 (64/99) Installing x264-libs (0.164_git20220602-r0)
🐸 (65/99) Installing numactl (2.0.16-r1)
🐸 (66/99) Installing x265-libs (3.5-r3)
🐸 (67/99) Installing xvidcore (1.3.7-r1)
🐸 (68/99) Installing libsodium (1.0.18-r2)
🐸 (69/99) Installing libzmq (4.3.4-r1)
🐸 (70/99) Installing ffmpeg-libs (5.1.3-r0)
🐸 (71/99) Installing ffmpeg (5.1.3-r0)
🐸 (72/99) Installing py3-netifaces (0.11.0-r1)
🐸 (73/99) Installing py3-olefile (0.46-r6)
🐸 (74/99) Installing gdbm (1.23-r0)
🐸 (75/99) Installing xz-libs (5.2.9-r0)
🐸 (76/99) Installing mpdecimal (2.5.1-r1)
🐸 (77/99) Installing sqlite-libs (3.40.1-r0)
🐸 (78/99) Installing python3 (3.10.10-r0)
🐸 (79/99) Installing libimagequant (4.0.4-r0)
🐸 (80/99) Installing lcms2 (2.14-r0)
🐸 (81/99) Installing openjpeg (2.5.0-r0)
🐸 (82/99) Installing zstd-libs (1.5.2-r9)
🐸 (83/99) Installing tiff (4.4.0-r3)
🐸 (84/99) Installing py3-pillow (9.3.0-r0)
🐸 (85/99) Installing py3-six (1.16.0-r3)
🐸 (86/99) Installing py3-retrying (1.3.3-r3)
🐸 (87/99) Installing py3-parsing (3.0.9-r0)
🐸 (88/99) Installing py3-packaging (21.3-r2)
🐸 (89/99) Installing py3-setuptools (65.6.0-r0)
🐸 (90/99) Installing py3-pip (22.3.1-r1)
🐸 (91/99) Installing py3-psutil (5.9.4-r0)
🐸 (92/99) Installing py3-regex (2022.10.31-r0)
🐸 (93/99) Installing yaml (0.2.5-r0)
🐸 (94/99) Installing py3-yaml (6.0-r0)
🐸 (95/99) Installing libuv (1.44.2-r0)
🐸 (96/99) Installing libwebsockets (4.3.2-r1)
🐸 (97/99) Installing libwebsockets-evlib_uv (4.3.2-r1)
🐸 (98/99) Installing json-c (0.16-r2)
🐸 (99/99) Installing ttyd (1.7.2-r0)
🐸 Executing busybox-1.35.0-r29.trigger
🐸 OK: 173 MiB in 130 packages
🐸 Collecting packaging
🐸 Downloading packaging-23.0-py3-none-any.whl (42 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 42.7/42.7 kB 392.3 kB/s eta 0:00:00
🐸 Installing collected packages: packaging
🐸 Successfully installed packaging-23.0
🐸 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
🐸 Collecting https://github.com/feelfreelinux/octo4a-argon2-mock/archive/main.zip
🐸 Downloading https://github.com/feelfreelinux/octo4a-argon2-mock/archive/main.zip
🐸 - 6.3 kB 1.2 MB/s 0:00:00
🐸 Installing build dependencies: started
🐸 Installing build dependencies: finished with status 'done'
🐸 Getting requirements to build wheel: started
🐸 Getting requirements to build wheel: finished with status 'done'
🐸 Preparing metadata (pyproject.toml): started
🐸 Preparing metadata (pyproject.toml): finished with status 'done'
🐸 Building wheels for collected packages: argon2-cffi
🐸 Building wheel for argon2-cffi (pyproject.toml): started
🐸 Building wheel for argon2-cffi (pyproject.toml): finished with status 'done'
🐸 Created wheel for argon2-cffi: filename=argon2_cffi-21.3.0-py3-none-any.whl size=1606 sha256=c93ba382c8f724afaf5f24a61bb4423cebf80edf75e7b25dcc4c9b2c323bdd0b
🐸 Stored in directory: /tmp/pip-ephem-wheel-cache-s7cyjkyf/wheels/6b/30/6b/6fcc594d71f28bbcbd8aae83b53e1ca59e203102a84d4e1121
🐸 Successfully built argon2-cffi
🐸 Installing collected packages: argon2-cffi
🐸 Successfully installed argon2-cffi-21.3.0
🐸 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
💻 >curl -o octoprint.zip -L https://api.github.com/repos/OctoPrint/OctoPrint/zipball/1.8.7
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 % Total % Received % Xferd Average Speed Time Time Time Current
🐸 Dload Upload Total Spent Left Speed
🐸
🐸 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
🐸 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
🐸 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
🐸
🐸 100 11630 0 11630 0 0 9329 0 --:--:-- 0:00:01 --:--:-- 9329
🐸 100 2085k 0 2085k 0 0 1027k 0 --:--:-- 0:00:02 --:--:-- 2645k
🐸 100 5408k 0 5408k 0 0 1776k 0 --:--:-- 0:00:03 --:--:-- 3001k
🐸 100 6452k 0 6452k 0 0 1962k 0 --:--:-- 0:00:03 --:--:-- 3155k
💻 >echo PWD IS $PWD, and running as $USER, patch is $PATH, Unzip is at $(which unzip) && ls -lah $(which unzip)
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 PWD IS /root, and running as root, patch is /sbin:/usr/sbin:/bin:/usr/bin, Unzip is at
🐸 total 6M
🐸 drwxrwx--- 4 root 1028 4.0K Mar 27 19:15 .
🐸 drwx------ 23 root root 4.0K Mar 27 19:16 ..
🐸 drwxrwx--- 3 root 1028 4.0K Mar 27 19:15 .cache
🐸 -rwxrwx--- 1 root 1028 10 Mar 27 19:14 .octoCredentials
🐸 drwxrwx--- 3 root 1028 4.0K Mar 27 19:14 extensions
🐸 -rwxrwx--- 1 root 1028 6.3M Mar 27 19:16 octoprint.zip
💻 >ls -lah
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 total 6M
🐸 drwxrwx--- 4 root 1028 4.0K Mar 27 19:15 .
🐸 drwx------ 23 root root 4.0K Mar 27 19:16 ..
🐸 drwxrwx--- 3 root 1028 4.0K Mar 27 19:15 .cache
🐸 -rwxrwx--- 1 root 1028 10 Mar 27 19:14 .octoCredentials
🐸 drwxrwx--- 3 root 1028 4.0K Mar 27 19:14 extensions
🐸 -rwxrwx--- 1 root 1028 6.3M Mar 27 19:16 octoprint.zip
💻 >7z x -y octoprint.zip
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸
🐸 7-Zip [32] 17.04 : Copyright (c) 1999-2021 Igor Pavlov : 2017-08-28
🐸 p7zip Version 17.04 (locale='en_US.UTF-8',Utf16=on,HugeFiles=on,32 bits,4 CPUs LE)
🐸
🐸 Scanning the drive for archives:
🐸 1 file, 6607230 bytes (6453 KiB)
🐸
🐸 Extracting archive: octoprint.zip
🐸 --
🐸 Path = octoprint.zip
🐸 Type = zip
🐸 Physical Size = 6607230
🐸 Comment = 8e4c1f5246c4245b839ccdcdabf2beee671b08d7
🐸
🐸 Everything is Ok
🐸
🐸 Folders: 219
🐸 Files: 881
🐸 Size: 20391229
🐸 Compressed: 6607230
💻 >cd Octo* && pip3 install .
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffef5 arg 0x1018
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6ffffffe arg 0x15b8
🐸 WARNING: linker: ./root/bin/proot: unused DT entry: type 0x6fffffff arg 0x1
🐸 proot warning: can't sanitize binding "/data/data/com.octo4a/files/serialpipe": No such file or directory
🐸 Processing /root/OctoPrint-OctoPrint-8e4c1f5
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting OctoPrint-FileCheck>=2021.2.23
🐸 Downloading OctoPrint_FileCheck-2021.2.23-py2.py3-none-any.whl (19 kB)
🐸 Collecting OctoPrint-FirmwareCheck>=2021.10.11
🐸 Downloading OctoPrint_FirmwareCheck-2021.10.11-py2.py3-none-any.whl (33 kB)
🐸 Collecting OctoPrint-PiSupport>=2022.6.13
🐸 Downloading OctoPrint_PiSupport-2022.6.13-py2.py3-none-any.whl (33 kB)
🐸 Requirement already satisfied: argon2_cffi<22,>=21.3.0 in /usr/lib/python3.10/site-packages (from OctoPrint==1.8.7) (21.3.0)
🐸 Collecting cachelib<0.3,>=0.2
🐸 Downloading cachelib-0.2.0-py3-none-any.whl (12 kB)
🐸 Collecting Click<9,>=8.0.3
🐸 Downloading click-8.1.3-py3-none-any.whl (96 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 96.6/96.6 kB 1.4 MB/s eta 0:00:00
🐸 Collecting colorlog<7,>=6
🐸 Downloading colorlog-6.7.0-py2.py3-none-any.whl (11 kB)
🐸 Collecting emoji<2,>=1.4.2
🐸 Downloading emoji-1.7.0.tar.gz (175 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 175.4/175.4 kB 1.6 MB/s eta 0:00:00
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting feedparser<7,>=6.0.8
🐸 Downloading feedparser-6.0.10-py3-none-any.whl (81 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 81.1/81.1 kB 1.4 MB/s eta 0:00:00
🐸 Collecting filetype<2,>=1.0.7
🐸 Downloading filetype-1.2.0-py2.py3-none-any.whl (19 kB)
🐸 Collecting Flask-Assets<3,>=2.0
🐸 Downloading Flask_Assets-2.0-py3-none-any.whl (8.5 kB)
🐸 Collecting Flask-Babel<3,>=2.0
🐸 Downloading Flask_Babel-2.0.0-py3-none-any.whl (9.3 kB)
🐸 Collecting Flask-Login<0.6,>=0.5
🐸 Downloading Flask_Login-0.5.0-py2.py3-none-any.whl (16 kB)
🐸 Collecting Flask-Limiter<3,>=2.6
🐸 Downloading Flask_Limiter-2.9.2-py3-none-any.whl (27 kB)
🐸 Collecting flask<2.2,>=2.1
🐸 Downloading Flask-2.1.3-py3-none-any.whl (95 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 95.6/95.6 kB 720.3 kB/s eta 0:00:00
🐸 Collecting frozendict<3,>=2.0
🐸 Downloading frozendict-2.3.6.tar.gz (35 kB)
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting future<1,>=0.18.2
🐸 Downloading future-0.18.3.tar.gz (840 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 840.9/840.9 kB 3.5 MB/s eta 0:00:00
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting markdown<4,>=3.2.2
🐸 Downloading Markdown-3.4.3-py3-none-any.whl (93 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.9/93.9 kB 1.7 MB/s eta 0:00:00
🐸 Collecting netaddr<0.9,>=0.8
🐸 Downloading netaddr-0.8.0-py2.py3-none-any.whl (1.9 MB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.9/1.9 MB 2.2 MB/s eta 0:00:00
🐸 Requirement already satisfied: netifaces<1,>=0.11 in /usr/lib/python3.10/site-packages (from OctoPrint==1.8.7) (0.11.0)
🐸 Collecting passlib<2,>=1.7.4
🐸 Downloading passlib-1.7.4-py2.py3-none-any.whl (525 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 525.6/525.6 kB 3.3 MB/s eta 0:00:00
🐸 Collecting pathvalidate<3,>=2.4.1
🐸 Downloading pathvalidate-2.5.2-py3-none-any.whl (20 kB)
🐸 Collecting pkginfo<2,>=1.7.1
🐸 Downloading pkginfo-1.9.6-py3-none-any.whl (30 kB)
🐸 Requirement already satisfied: psutil<6,>=5.8 in /usr/lib/python3.10/site-packages (from OctoPrint==1.8.7) (5.9.4)
🐸 Collecting pylru<2,>=1.2
🐸 Downloading pylru-1.2.1-py3-none-any.whl (16 kB)
🐸 Collecting pyserial<4,>=3.4
🐸 Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 1.7 MB/s eta 0:00:00
🐸 Collecting PyYAML<6,>=5.4.1
🐸 Downloading PyYAML-5.4.1.tar.gz (175 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 175.1/175.1 kB 2.5 MB/s eta 0:00:00
🐸 Installing build dependencies: started
🐸 Installing build dependencies: finished with status 'done'
🐸 Getting requirements to build wheel: started
🐸 Getting requirements to build wheel: finished with status 'done'
🐸 Preparing metadata (pyproject.toml): started
🐸 Preparing metadata (pyproject.toml): finished with status 'done'
🐸 Collecting requests<3,>=2.26.0
🐸 Downloading requests-2.28.2-py3-none-any.whl (62 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 1.1 MB/s eta 0:00:00
🐸 Collecting sarge==0.1.6
🐸 Downloading sarge-0.1.6.tar.gz (26 kB)
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting semantic_version<3,>=2.8.5
🐸 Downloading semantic_version-2.10.0-py2.py3-none-any.whl (15 kB)
🐸 Collecting sentry-sdk<2,>=1.5.7
🐸 Downloading sentry_sdk-1.17.0-py2.py3-none-any.whl (189 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 189.1/189.1 kB 1.6 MB/s eta 0:00:00
🐸 Collecting tornado<7,>=6.0.4
🐸 Downloading tornado-6.2.tar.gz (504 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 504.8/504.8 kB 2.0 MB/s eta 0:00:00
🐸 Installing build dependencies: started
🐸 Installing build dependencies: finished with status 'done'
🐸 Getting requirements to build wheel: started
🐸 Getting requirements to build wheel: finished with status 'done'
🐸 Preparing metadata (pyproject.toml): started
🐸 Preparing metadata (pyproject.toml): finished with status 'done'
🐸 Collecting watchdog<2,>=1
🐸 Downloading watchdog-1.0.2.tar.gz (98 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.5/98.5 kB 1.6 MB/s eta 0:00:00
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting websocket-client<2,>=1.2.1
🐸 Downloading websocket_client-1.5.1-py3-none-any.whl (55 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 55.9/55.9 kB 720.9 kB/s eta 0:00:00
🐸 Collecting werkzeug<2.1,>=2.0
🐸 Downloading Werkzeug-2.0.3-py3-none-any.whl (289 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 289.2/289.2 kB 1.9 MB/s eta 0:00:00
🐸 Collecting wrapt<1.15,>=1.14
🐸 Downloading wrapt-1.14.1.tar.gz (50 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 50.9/50.9 kB 638.2 kB/s eta 0:00:00
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting zeroconf<0.34,>=0.33
🐸 Downloading zeroconf-0.33.4-py3-none-any.whl (89 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 89.8/89.8 kB 1.5 MB/s eta 0:00:00
🐸 Collecting zipstream-ng<2.0.0,>=1.3.4
🐸 Downloading zipstream_ng-1.4.0-py3-none-any.whl (21 kB)
🐸 Collecting blinker<2,>=1.4
🐸 Downloading blinker-1.5-py2.py3-none-any.whl (12 kB)
🐸 Requirement already satisfied: regex in /usr/lib/python3.10/site-packages (from OctoPrint==1.8.7) (2022.10.31)
🐸 Collecting unidecode
🐸 Downloading Unidecode-1.3.6-py3-none-any.whl (235 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 235.9/235.9 kB 2.2 MB/s eta 0:00:00
🐸 Collecting sgmllib3k
🐸 Downloading sgmllib3k-1.0.0.tar.gz (5.8 kB)
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Collecting Jinja2>=3.0
🐸 Downloading Jinja2-3.1.2-py3-none-any.whl (133 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.1/133.1 kB 1.8 MB/s eta 0:00:00
🐸 Collecting itsdangerous>=2.0
🐸 Downloading itsdangerous-2.1.2-py3-none-any.whl (15 kB)
🐸 Collecting webassets>=2.0
🐸 Downloading webassets-2.0-py3-none-any.whl (142 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 142.9/142.9 kB 2.3 MB/s eta 0:00:00
🐸 Collecting Babel>=2.3
🐸 Downloading Babel-2.12.1-py3-none-any.whl (10.1 MB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.1/10.1 MB 2.8 MB/s eta 0:00:00
🐸 Collecting pytz
🐸 Downloading pytz-2023.2-py2.py3-none-any.whl (502 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 502.1/502.1 kB 3.7 MB/s eta 0:00:00
🐸 Collecting ordered-set<5,>4
🐸 Downloading ordered_set-4.1.0-py3-none-any.whl (7.6 kB)
🐸 Collecting typing-extensions>=4
🐸 Downloading typing_extensions-4.5.0-py3-none-any.whl (27 kB)
🐸 Collecting limits>=2.8
🐸 Downloading limits-3.3.1-py3-none-any.whl (43 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.8/43.8 kB 599.7 kB/s eta 0:00:00
🐸 Collecting rich<13,>=12
🐸 Downloading rich-12.6.0-py3-none-any.whl (237 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 237.5/237.5 kB 2.5 MB/s eta 0:00:00
🐸 Collecting idna<4,>=2.5
🐸 Downloading idna-3.4-py3-none-any.whl (61 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 1.3 MB/s eta 0:00:00
🐸 Collecting urllib3<1.27,>=1.21.1
🐸 Downloading urllib3-1.26.15-py2.py3-none-any.whl (140 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.9/140.9 kB 2.4 MB/s eta 0:00:00
🐸 Collecting certifi>=2017.4.17
🐸 Downloading certifi-2022.12.7-py3-none-any.whl (155 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.3/155.3 kB 1.6 MB/s eta 0:00:00
🐸 Collecting charset-normalizer<4,>=2
🐸 Downloading charset_normalizer-3.1.0-py3-none-any.whl (46 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.2/46.2 kB 977.8 kB/s eta 0:00:00
🐸 Collecting ifaddr>=0.1.7
🐸 Downloading ifaddr-0.2.0-py3-none-any.whl (12 kB)
🐸 Collecting MarkupSafe>=2.0
🐸 Downloading MarkupSafe-2.1.2.tar.gz (19 kB)
🐸 Preparing metadata (setup.py): started
🐸 Preparing metadata (setup.py): finished with status 'done'
🐸 Requirement already satisfied: setuptools in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint==1.8.7) (65.6.0)
🐸 Requirement already satisfied: packaging<24,>=21 in /usr/lib/python3.10/site-packages (from limits>=2.8->Flask-Limiter<3,>=2.6->OctoPrint==1.8.7) (23.0)
🐸 Collecting deprecated>=1.2
🐸 Downloading Deprecated-1.2.13-py2.py3-none-any.whl (9.6 kB)
🐸 Collecting importlib-resources>=1.3
🐸 Downloading importlib_resources-5.12.0-py3-none-any.whl (36 kB)
🐸 Collecting commonmark<0.10.0,>=0.9.0
🐸 Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 807.2 kB/s eta 0:00:00
🐸 Collecting pygments<3.0.0,>=2.6.0
🐸 Downloading Pygments-2.14.0-py3-none-any.whl (1.1 MB)
🐸 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 2.9 MB/s eta 0:00:00
🐸 Building wheels for collected packages: PyYAML, tornado
🐸 Building wheel for PyYAML (pyproject.toml): started
🐸 Building wheel for PyYAML (pyproject.toml): finished with status 'done'
🐸 WARNING: Building wheel for PyYAML failed: [Errno 1] Operation not permitted
🐸 Building wheel for tornado (pyproject.toml): started
🐸 Building wheel for tornado (pyproject.toml): finished with status 'done'
🐸 WARNING: Building wheel for tornado failed: [Errno 1] Operation not permitted
🐸 Failed to build PyYAML tornado
🐸 ERROR: Could not build wheels for PyYAML, tornado, which is required to install pyproject.toml-based projects
💻 An exception has occurred at:
java.lang.RuntimeException: Process exited with error code 1. [WARNING: linker: ./root/bin/proot: unused DT entr
at com.octo4a.utils.ProcessUtilsKt.waitAndPrintOutput(ProcessUtils.kt:38)
at com.octo4a.utils.ProcessUtilsKt.waitAndPrintOutput$default(ProcessUtils.kt:12)
at com.octo4a.repository.OctoPrintHandlerRepositoryImpl$beginInstallation$2.invokeSuspend(OctoPrintHandlerRepository.kt:164)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith(ContinuationImpl.kt:33)
at kotlinx.coroutines.UndispatchedCoroutine.afterResume(Builders.common.kt:265)
at kotlinx.coroutines.AbstractCoroutine.resumeWith(AbstractCoroutine.kt:113)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith(ContinuationImpl.kt:46)
at io.ktor.util.pipeline.SuspendFunctionGun.resumeRootWith(SuspendFunctionGun.kt:191)
at io.ktor.util.pipeline.SuspendFunctionGun.loop(SuspendFunctionGun.kt:147)
at io.ktor.util.pipeline.SuspendFunctionGun.access$loop(SuspendFunctionGun.kt:15)
at io.ktor.util.pipeline.SuspendFunctionGun$continuation$1.resumeWith(SuspendFunctionGun.kt:93)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith(ContinuationImpl.kt:46)
at io.ktor.util.pipeline.SuspendFunctionGun.resumeRootWith(SuspendFunctionGun.kt:191)
at io.ktor.util.pipeline.SuspendFunctionGun.loop(SuspendFunctionGun.kt:147)
at io.ktor.util.pipeline.SuspendFunctionGun.access$loop(SuspendFunctionGun.kt:15)
at io.ktor.util.pipeline.SuspendFunctionGun$continuation$1.resumeWith(SuspendFunctionGun.kt:93)
at kotlin.coroutines.jvm.internal.BaseContinuationImpl.resumeWith(ContinuationImpl.kt:46)
at kotlinx.coroutines.DispatchedTask.run(DispatchedTask.kt:106)
at kotlinx.coroutines.scheduling.CoroutineScheduler.runSafely(CoroutineScheduler.kt:571)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.executeTask(CoroutineScheduler.kt:750)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.runWorker(CoroutineScheduler.kt:678)
at kotlinx.coroutines.scheduling.CoroutineScheduler$Worker.run(CoroutineScheduler.kt:665)
Exception: java.lang.RuntimeException: Process exited with error code 1. [WARNING: linker: ./root/bin/proot: unused DT entr
Install stops for me at the same point installing dependencies on Galaxy Note 3 (on Android 4.3)
🐸 Building wheels for collected packages: PyYAML, tornado 🐸 Building wheel for PyYAML (pyproject.toml): started 🐸 Building wheel for PyYAML (pyproject.toml): finished with status 'done' 🐸 WARNING: Building wheel for PyYAML failed: [Errno 1] Operation not permitted 🐸 Building wheel for tornado (pyproject.toml): started 🐸 Building wheel for tornado (pyproject.toml): finished with status 'done' 🐸 WARNING: Building wheel for tornado failed: [Errno 1] Operation not permitted 🐸 Failed to build PyYAML tornado 🐸 ERROR: Could not build wheels for PyYAML, tornado, which is required to install pyproject.toml-based projects
i had the same problem on my samsung note 4 with android 6 but i changed rom and that fixed it ,now using lineageOS 18.1
