arpl
arpl copied to clipboard
fbelavenuto
Automated Redpill Loader
Using v1.1-beta2a Everything working, so I firstly want to thank you for this. Secondly, I am looking for a way to hide the bootloader USB from DSM, is this possible...
Hi everyone, every time i upgrade ProxMox i must re-install DSM like the first boot up..... Is there a way to do not this? Thanx in advance! Zippi
H i have an simpel atom d525 ion2 based board i wanted to tinker a bit with But tinycore and this automated version see the nic when i do lspci...
would you like add virtio driver? because in vultr it cant detect HDD that been attached to the instance thank you
Olá,Synology lançado 7.1.1-42962 Update 5 e 7.2-64551RC,Espero que acompanhe, obrigado
Which cpu models are compatible with the bootloader / DSM software. Can I use INTEL and AMD as cpu?
hi, thank you for your amazing work can you create ISO files rather than IMG and vmdk files? thank you
Can DVA1622 output surveillance signal through HDMI ? II can use the same configuration as DVA1622,such as J4125.......
故障总述：编译好后启动群辉查找不到硬盘。 编译的系统：DS918+,DS3622xs,DVA3221 故障描述：使用0.4 bate12版本编译的能正常进入引导，但是0.5开始直到最新版本，在ARPL下能正确挂在硬盘，可以识别到正确的分区信息，在群辉下只能识别到是RAM之类的标识，群辉没有正确挂在硬盘，系统安装界面提升未找到硬盘，不能安装群晖系统。 硬件平台：Dell 730xd 硬件配置： CPU：E5 2680V4 *2， 内存：三星 DDR4 ECC 2400T 2Rx4 32Gb * 8， 网卡：Intel(R) 2P X540/2P I350 rNDC， 阵列卡：刷了IT模式的直通卡H330（芯片是LSI3008），HBA模式下的H330.两种阵列卡同样的故障。 硬盘：希捷酷狼4T *12，SATA SSD *2 ，PCIE nvme...
**I have the following hardware** Intel NUC12WSHi3 i3 1220P 32 GB DDR4 3200hz I’d like to use both NVMe storage and VMM support. I ran into this thread and did...
