ProLiant MicroServer Gen8 unable to boot .

[Kowalskixx]

iLO 4

Decompressing Linux... Parsing ELF... Performing relocations.. Booting the kernel.

[fbelavenuto]

Please try with and without EFI enabled

[Kowalskixx]

Thanks for your reply .I will try it shortly.

[cvc90]

Thanks for your reply .I will try it shortly.

Have you been able to try it?

[fbelavenuto]

There is one more thing to try, enable direct boot

[fbelavenuto]

Some success?

[Kowalskixx]

Yeah dude .I think the only issue is the disk map.and got affected COVID-19 . 😂

---

发件人: Fabio Belavenuto @.> 发送时间: Monday, December 19, 2022 9:06:01 PM 收件人: fbelavenuto/arpl @.> 抄送: Kowalskixx @.>; Author @.> 主题: Re: [fbelavenuto/arpl] ProLiant MicroServer Gen8 unable to boot . (Issue #322)

Some success?

— Reply to this email directly, view it on GitHubhttps://github.com/fbelavenuto/arpl/issues/322#issuecomment-1357636576, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A4AHN3BSH7UVP55UJKHUTNLWOBMTTANCNFSM6AAAAAASBRAG4U. You are receiving this because you authored the thread.Message ID: @.***>

[guitengyue]

Please try with and without EFI enabled

Encountered the same problem on Inspur server , SA5112M4 when I set the efi disable , the interface is the same as above . when I set the efi enable , The booting interface is stuck

[ByteRipper2022]

when I set the efi disable , the interface is the same as above . when I set the efi enable , The booting interface is stuck

I encouter just the same problem on my J1800 nas.

I've tried nearly every bios setting without success. The only thing that helps is removing one ram stick. I don't know why because the stick is working properly.

[we11adam]

Having trouble with HP MicroServer Gen8, too.

Host OS: PVE 7.3 VM: 8GM RAM/Q35 ARPL Config:

Serial port console log: https://pastebin.com/wH3nz62x

[fbelavenuto]

Having trouble with HP MicroServer Gen8, too.

Host OS: PVE 7.3 VM: 8GM RAM/Q35 ARPL Config:

Serial port console log: https://pastebin.com/wH3nz62x

Hi, please try to enable the direct boot into advanced menu, is necessary for HP microserver

[we11adam]

Having trouble with HP MicroServer Gen8, too. Host OS: PVE 7.3 VM: 8GM RAM/Q35 ARPL Config: Serial port console log: https://pastebin.com/wH3nz62x

Hi, please try to enable the direct boot into advanced menu, is necessary for HP microserver

Thanks for reply!

However it didn't work either even if I have enabled direct boot. It boots perfectly fine with or without direct boot if I remove the PCI passthrough(for now it's a SATA controller).

[fbelavenuto]

Please update ARPL, reboot, update modules, addons and lkm, rebuild the loader and test it.

[fbelavenuto]

Maybe related #260

[we11adam]

Please update ARPL, reboot, update modules, addons and lkm, rebuild the loader and test it.

Thanks! 👍 My server is currently occupied for something else. Will definitely try it out when I have the chance.