daq
daq copied to clipboard
faucetsdn
Reach devices under test from DAQ machine with browser or ssh connection for configuration purposes
To configure IP connected building control devices, it would be extremely useful to use DAQ to put them in a reachable network state reachable from the host. The -n option already creates the network, but the devices under testing are not accessible from the DAQ machine.
The use case is to open a browser and reach the device on port 80/443 or open an ssh connection on port 22 from the DAQ machine. Other ports might be useful in the future.
Thanks!
Is this still an issue? Do we need the feature from the DAQ machine, and/or was the maybe-workaround working?
I got the local connection working a couple of times (very useful!) but would like to check it thoroughly before closing this. I'll try it tomorrow and report back.
Can you put together a how-to if there's not already one? If it's useful, then we should document!
On Sun, Jan 27, 2019, 4:02 PM Francesco Anselmo [email protected] wrote:
I got the local connection working a couple of times (very useful!) but would like to check it thoroughly before closing this. I'll try it tomorrow and report back.
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/faucetsdn/daq/issues/50#issuecomment-457966588, or mute the thread https://github.com/notifications/unsubscribe-auth/ABBHjzJjGM4C4N7N5TAiuZ6PZM2JSnBlks5vHj33gaJpZM4Y1tE9 .