Differences between bht 8000 and Moes

[grbasta]

Good morning, then maybe we didn't understand each other, I have the same firmware, I have installed it both on the Moes and on the BHT 8000 as you can see from the attached photo, the only difference is that for the moes I used the tuya at the time -convert and on the BHT 8000 with cables soldered on the TYWES3. Except that for the Moes on Home Assistant no problem, while the BHT 8000 does not detect the status and temperatures, but accepts the commands. Accessing from the web: on the MOES and it works fine. http://192.168.2.18/things/thermostat/properties I read this: {"idx": "Thermostat-P1", "ip": "192.168.2.18", "firmware": "1.18-fas", "switchBackToAuto": true, "temperature": 22.50, "targetTemperature": 22.00, " deviceOn ": true," schedulesMode ":" off "," ecoMode ": false," locked ": false," mode ":" heat "," action ":" idle "," state ":" off "," mcuId ":" IAYz2WK1th0cMLmL1.0.0 "} Accessing from the web: on the BHT 8000 and it works badly. http://192.168.2.16/things/thermostat/properties I read this: {"idx": "Thermostat-PT", "ip": "192.168.2.16", "firmware": "1.18-fas", "switchBackToAuto": true, "temperature": 23.00, "targetTemperature": 22.00, " deviceOn ": true," schedulesMode ":" off "," ecoMode ": false," locked ": false," mode ":" heat "," action ":" idle "," state ":" off "," mcuId ":" {"p": "IAYz2WK1th0cMLmL", "v": "1.0"}

I noticed that on the second result after mcuID there is a {too many, so I think that's what messes up the reading on Mqtt. How can this be solved? I don't know what software you can use. Thanks