WThermostatBeca

WThermostatBeca copied to clipboard

Is this a new version of bac-002-wifi?

17

Hello, I ordered a set of new GALWW thermostats from Moes. After I opened the device, I saw a different label than I suspected. It is labeled "ZWX-GA/GC-CONTROL" and it...

kobi-wan

Hangs up when switching off from HA

5

Hi, i'm a bloody beginner in using a thermostat with Home Assistant. But i bought a BHT-002 and flashed successful to firmware WThermostat 1.18-fas. After that i set up an...

FreakyPady

Wrong state in Home Assistant

6

When thermostat is in auto mode (scheduler) and I change temperature in Home Assistant then the mode in HA changes to manual but mode in device stays on scheduler. So...

blackscreener

Thanks for the code been stable for 18 months I want to add some TVRs Is there a way to trigger the relay via mqtt to start my boiler

ardenking

BHT-002 WiFi Thermostat WiFi Issue

9

Occasionally device loses wifi connection and is no longer reachable. I expected it to switch to AP mode in ordder to allow a device reboot but that doesn't happen. The...

megagenio

BHT-002 does not reconnect to wi-fi router after router's reboot

6

Hello, thank you for your firmware! The problem I have is that after reboot of wi-fi router, the BHT-002 does not reconnect to the wifi network. The only way to...

paulius2k

mqtt options deprecated in Home Assistant 2022.03

3

Hi @fashberg First, a big thank you for your work, I have flashed my thermostat about 7-8 months ago and everything just works. If you have some time, can you...

Flopescu

remove awaymode from Config

1

jressel01

Change temperature sensor

15

is it possible to adjust to another temperature sensor? for example 6.8 ntc?

dimvia

Support for TH213-TY

1

I have a thermostat that is not supported at the moment. I would like to use it with WThermostatBeca and could maybe help with development. Name: TH213-TY-V1.5 WiFi: TYWE1S-IPEX MCU:...

michanehls