smartcitizen-kit-21
smartcitizen-kit-21 copied to clipboard
fablabbcn
Smart Citizen Kit 2.1 hardware and firmware
## PROBLEM : The kit is set to SD mode and collects data properly. Next, the kit is left to run using its battery until it completely drains out and...
Given the wide variety of possible configurations, we should consider a new way to calibrate temperature/humidity. Options: - More defines - Add control command - ..? Just dumping ideas here
The ESP update process fails because the firmware size file is too large. More info coming later.
It seems that even if the ESP is reset after establishing a connection to a local network, the ESP8266 leaves the AP open. This has been verified with a network...
``` SCK > config -pubint 3000 ESP finished booting -- New config -- Mode: network Publish interval (s): 3000 Reading interval (s): 60 Wifi credentials: XXX - YYY Token: AAAAAA...
Newer versions of the firmware are weirdly interpreting previous flash storage data with the wrong IDs. This is creating new components in the platform. Currently, the rootcause is not understood...
Control commands for sensors don't parse correctly when there are more than two words on the command: This works: ``` SCK > control sen5x SEN5X PM 1.0: Available commands: *...
Look at the link for updating firmware as an example. The URL has changed since this was published and need to be updated in several spots.
