Edouard Griffiths

It depends on what you mean by "modify/clean it". There are indirect ways to do this. For example to implement a repeater use case you can use the system audio...

OK I was not aware of the discussion. So basically this leads us to my third point. For now there is a segregation between Rx and Tx I/Q flows. To...

Feature plugins are there to support functionalities not directly related to an I/Q stream. The Demod Analyzer does consume I/Q samples but is not limited to complex I/Q and is...

> I thought that should be the rx plugin to send data back again. No... this is not very clean regarding the whole design. You have to go through the...

Hello @Blukain It will be very difficult to help you if I can't see the code. Have you forked this repo and committed your changes?

You have first to check with your application what do these parameters mean in terms of code rate. Then you have to adjust the bandwidth (https://github.com/f4exb/sdrangel/blob/master/plugins/channelrx/demodchirpchat/readme.md#3-bandwidth) to match the code...

Be careful that usually with a spread factor (SF) of 11 or 12 comes a "distance enhancement" (DE) factor of 2

For a diversity setup to work correctly you need to have the receivers LOs and DACs synchronized to the same clock which concretely happens only on a few devices that...

You have a demo of the RSP Duo witn SDR uno here: https://youtu.be/omykm0Q_7hQ It looks like the mixing of signals is done in software so I suppose that when the...

Soon to be released. It works!   I wish Yaesu or Icom would make it available on their transceivers :wink: