plain60-flex-edition
plain60-flex-edition copied to clipboard
evyd13
JLCPCB format BOM for SMT assembly
I'm trying to get the BOM in JLCCPCB's format for SMT assembly, and I wanted to double check that I've done it correctly as I'm entirely inexperienced with PCB design. This is what I have so far:
| Desciption | Comment | Designator | Footprint | LCSC Part # |
|---|---|---|---|---|
| Capacitor | 0.1uF | C2, C3, C4, C5 | 0805 | C128353 |
| Capacitor | 4.7uF | C6 | 0805 | C131056 |
| Capacitor | 1uF | C1 | 0805 | C215803 |
| Diode | D1 - D29, D31 - D44, D46 - D59, D61- D63, D67, D71-D74 | 0805 | C109001 | |
| Fuse | F1 | 0805 | C261942 | |
| Connector | J1 | SMD/THT | C165948 | |
| Resistor | 10K | R5, R6 | 0805 | C103904 |
| Resistor | 5.1K | R3, R4 | 0805 | C212411 |
| Resistor | 22 | R1, R2 | 0805 | C325772 |
| MCU | 32U4 | U1 | QFP-44 | C44854 |
| ESD chip | U2 | SOT23-6 | C7519 | |
| Resonator | 16MHz | X1 | SMD | C341521 |
| Switch | SW1 | SMD | C92584 | |
| Optional JST | J3 | SMD | C160404 |
My main concerns are:
- That I have the correct designator for each part
- ~~I count 66 diodes, however the BOM in the README lists 65 diodes. Is this a mistake or did I use a footprint that wasn't meant to be used? Or maybe I miscounted?~~ I found my problem. There is no D45. I updated the table
Thanks!
